2020 Ford Puma St MOT Pass Rate
Pass rate for Puma St models manufactured in 2020, based on 237 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Puma St cars tested in 2020. Want to see how cars built in 2020 hold up over time?
View 2020 Ford Puma St vintage page → (93.9% current pass rate)2020 Ford Puma St MOT Analysis
The 2020 Ford Puma St has an MOT pass rate of 95.4% based on 237 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 21,065 miles on the odometer. With a 4.6% failure rate, the 2020 Puma St is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2020 Ford Puma St is Noise, emissions and leaks, responsible for 3.4% of failures. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs range from £100–1,000+. Tyres is the second most common issue at 2.1%. Visibility follows at 1.3%.
Top failures specific to 2020 models only. The overall Puma St page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Noise, Emissions And Leaks | 3.4% | 8 |
| 2 | Tyres | 2.1% | 5 |
| 3 | Visibility | 1.3% | 3 |
| 4 | Brakes | 0.8% | 2 |
| 5 | Identification Of The Vehicle | 0.8% | 2 |
Failures per 10,000 Miles
avg. 21,065 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Noise, emissions and leaks | 1.60 | 3.4% | 8 |
| Tyres | 1.00 | 2.1% | 5 |
| Visibility | 0.60 | 1.3% | 3 |
| Brakes | 0.40 | 0.8% | 2 |
| Identification of the vehicle | 0.40 | 0.8% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2020 Ford Puma St has an MOT pass rate of 95.4% based on 237 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 21,065 miles on the odometer. With a 4.6% failure rate, the 2020 Puma St is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2020 Ford Puma St, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to noise, emissions and leaks: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help. With relatively low average mileage of 21,065 miles, many of these vehicles are still in good mechanical condition.
Noise, emissions and leaks — 3.4% of failures
Noise, emissions and leaks issues account for 3.4% of MOT failures on 2020 Ford Puma St models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Tyres — 2.1% of failures
Tyres issues account for 2.1% of MOT failures on 2020 Ford Puma St models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Visibility — 1.3% of failures
Visibility issues account for 1.3% of MOT failures on 2020 Ford Puma St models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.