1973 Hillman Imp MOT Pass Rate
Pass rate for Imp models manufactured in 1973, based on 60 real MOT test results.
Data from official DVSA MOT testing records
1973 Hillman Imp MOT Analysis
The 1973 Hillman Imp has an MOT pass rate of 65.0% based on 60 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,008 miles on the odometer. With a 35.0% failure rate, the 1973 Imp is rated as "Average" for MOT reliability.
The leading cause of MOT failure for the 1973 Hillman Imp is Brakes, responsible for 3.3% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Suspension is the second most common issue at 3.3%. Exhaust, Fuel and Emissions follows at 1.7%.
Top failures specific to 1973 models only. The overall Imp page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 3.3% | 2 |
| 2 | Suspension | 3.3% | 2 |
| 3 | Exhaust, Fuel And Emissions | 1.7% | 1 |
Failures per 10,000 Miles
avg. 54,008 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.62 | 3.3% | 2 |
| Suspension | 0.62 | 3.3% | 2 |
| Emissions & Exhaust | 0.31 | 1.7% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1973 Hillman Imp has an MOT pass rate of 65.0% based on 60 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,008 miles on the odometer. With a 35.0% failure rate, the 1973 Imp is rated as "Average" for MOT reliability.
If you own or are considering buying a 1973 Hillman Imp, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 54,008 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes — 3.3% of failures
Brakes issues account for 3.3% of MOT failures on 1973 Hillman Imp models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 3.3% of failures
Suspension issues account for 3.3% of MOT failures on 1973 Hillman Imp models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Exhaust, Fuel and Emissions — 1.7% of failures
Exhaust, Fuel and Emissions issues account for 1.7% of MOT failures on 1973 Hillman Imp models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.