1967 Hillman Minx MOT Pass Rate
Pass rate for Minx models manufactured in 1967, based on 106 real MOT test results.
Data from official DVSA MOT testing records
1967 Hillman Minx MOT Analysis
The 1967 Hillman Minx has an MOT pass rate of 80.2% based on 106 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,160 miles on the odometer. With a 19.8% failure rate, the 1967 Minx is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1967 Hillman Minx is Exhaust, Fuel and Emissions, responsible for 1.9% of failures. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs range from £100–1,000+. Suspension is the second most common issue at 0.9%. Body, chassis, structure follows at 0.9%.
Top failures specific to 1967 models only. The overall Minx page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Exhaust, Fuel And Emissions | 1.9% | 2 |
| 2 | Suspension | 0.9% | 1 |
| 3 | Body, Chassis, Structure | 0.9% | 1 |
| 4 | Brakes | 0.9% | 1 |
| 5 | Seat Belts And Supplementary Restraint Systems | 0.9% | 1 |
Failures per 10,000 Miles
avg. 52,160 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Emissions & Exhaust | 0.36 | 1.9% | 2 |
| Suspension | 0.18 | 0.9% | 1 |
| Body & Structure | 0.18 | 0.9% | 1 |
| Brakes | 0.18 | 0.9% | 1 |
| Seat Belts | 0.18 | 0.9% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1967 Hillman Minx has an MOT pass rate of 80.2% based on 106 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,160 miles on the odometer. With a 19.8% failure rate, the 1967 Minx is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1967 Hillman Minx, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to exhaust, fuel and emissions: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help. At 52,160 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Exhaust, Fuel and Emissions — 1.9% of failures
Exhaust, Fuel and Emissions issues account for 1.9% of MOT failures on 1967 Hillman Minx models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Suspension — 0.9% of failures
Suspension issues account for 0.9% of MOT failures on 1967 Hillman Minx models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 0.9% of failures
Body, chassis, structure issues account for 0.9% of MOT failures on 1967 Hillman Minx models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.