2006 Isuzu Bighorn MOT Pass Rate
Pass rate for Bighorn models manufactured in 2006, based on 94 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Bighorn cars tested in 2006. Want to see how cars built in 2006 hold up over time?
View 2006 Isuzu Bighorn vintage page → (67.6% current pass rate)2006 Isuzu Bighorn MOT Analysis
The 2006 Isuzu Bighorn has an MOT pass rate of 66.0% based on 94 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 160,965 miles on the odometer. With a 34.0% failure rate, the 2006 Bighorn is rated as "Good" for MOT reliability.
The leading cause of MOT failure for the 2006 Isuzu Bighorn is Body, chassis, structure, responsible for 17.0% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Lamps, reflectors and electrical equipment is the second most common issue at 14.9%. Suspension follows at 12.8%.
Top failures specific to 2006 models only. The overall Bighorn page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 17.0% | 16 |
| 2 | Lamps, Reflectors And Electrical Equipment | 14.9% | 14 |
| 3 | Suspension | 12.8% | 12 |
| 4 | Steering | 10.6% | 10 |
| 5 | Tyres | 8.5% | 8 |
| 6 | Brakes | 7.4% | 7 |
| 7 | Noise, Emissions And Leaks | 6.4% | 6 |
| 8 | Visibility | 5.3% | 5 |
| 9 | Non-component Advisories | 4.3% | 4 |
| 10 | Identification Of The Vehicle | 2.1% | 2 |
| 11 | Seat Belts And Supplementary Restraint Systems | 1.1% | 1 |
Failures per 10,000 Miles
avg. 160,965 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 1.06 | 17.0% | 16 |
| Lamps & Electrical | 0.93 | 14.9% | 14 |
| Suspension | 0.79 | 12.8% | 12 |
| Steering | 0.66 | 10.6% | 10 |
| Tyres | 0.53 | 8.5% | 8 |
| Brakes | 0.46 | 7.4% | 7 |
| Noise, emissions and leaks | 0.40 | 6.4% | 6 |
| Visibility | 0.33 | 5.3% | 5 |
| Non-component advisories | 0.26 | 4.3% | 4 |
| Identification of the vehicle | 0.13 | 2.1% | 2 |
| Seat Belts | 0.07 | 1.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2006 Isuzu Bighorn has an MOT pass rate of 66.0% based on 94 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 160,965 miles on the odometer. With a 34.0% failure rate, the 2006 Bighorn is rated as "Good" for MOT reliability.
If you own or are considering buying a 2006 Isuzu Bighorn, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 160,965 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 17.0% of failures
Body, chassis, structure issues account for 17.0% of MOT failures on 2006 Isuzu Bighorn models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, reflectors and electrical equipment — 14.9% of failures
Lamps, reflectors and electrical equipment issues account for 14.9% of MOT failures on 2006 Isuzu Bighorn models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 12.8% of failures
Suspension issues account for 12.8% of MOT failures on 2006 Isuzu Bighorn models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.