Skip to main content
Pass Your MOT

2005 Kawasaki Zr 1000 A2h MOT Pass Rate

Pass rate for Zr 1000 A2h models manufactured in 2005, based on 843 real MOT test results.

85.9%
Pass Rate
14.1%
Fail Rate
843
Total Tests
16,123
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Zr 1000 A2h cars tested in 2005. Want to see how cars built in 2005 hold up over time?

View 2005 Kawasaki Zr 1000 A2h vintage page โ†’ (93.9% current pass rate)

2005 Kawasaki Zr 1000 A2h MOT Analysis

The 2005 Kawasaki Zr 1000 A2h has an MOT pass rate of 85.9% based on 843 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 16,123 miles on the odometer. With a 14.1% failure rate, the 2005 Zr 1000 A2h is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2005 Kawasaki Zr 1000 A2h is Identification of the vehicle, responsible for 0.1% of failures. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs range from ยฃ10โ€“50. Motorcycle brakes is the second most common issue at 0.1%. Motorcycle lamps and reflectors follows at 0.1%.

Top failures specific to 2005 models only. The overall Zr 1000 A2h page may show different rankings.

What Fails Most

Identification of the vehicle 0.1%
Motorcycle brakes 0.1%
Motorcycle lamps and reflectors 0.1%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Identification Of The Vehicle0.1%1
2Motorcycle Brakes0.1%1
3Motorcycle Lamps And Reflectors0.1%1

Failures per 10,000 Miles

avg. 16,123 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Identification of the vehicle0.07% per 10K miMotorcycle brakes0.07% per 10K miMotorcycle lamps and reflectors0.07% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Identification of the vehicle0.070.1%1
Motorcycle brakes0.070.1%1
Motorcycle lamps and reflectors0.070.1%1

Mileage Statistics

16,123
Mean
13,365
Median
8,663
25th Percentile
24,499
75th Percentile
8.75% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2005 Kawasaki Zr 1000 A2h has an MOT pass rate of 85.9% based on 843 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 16,123 miles on the odometer. With a 14.1% failure rate, the 2005 Zr 1000 A2h is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2005 Kawasaki Zr 1000 A2h, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to identification of the vehicle: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing. With relatively low average mileage of 16,123 miles, many of these vehicles are still in good mechanical condition.

Identification of the vehicle โ€” 0.1% of failures

Identification of the vehicle issues account for 0.1% of MOT failures on 2005 Kawasaki Zr 1000 A2h models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: ยฃ10โ€“50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.

Motorcycle brakes โ€” 0.1% of failures

Motorcycle brakes issues account for 0.1% of MOT failures on 2005 Kawasaki Zr 1000 A2h models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Motorcycle lamps and reflectors โ€” 0.1% of failures

Motorcycle lamps and reflectors issues account for 0.1% of MOT failures on 2005 Kawasaki Zr 1000 A2h models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue