2016 Ktm 250 MOT Pass Rate
Pass rate for 250 models manufactured in 2016, based on 413 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 250 cars tested in 2016. Want to see how cars built in 2016 hold up over time?
View 2016 Ktm 250 vintage page → (93.7% current pass rate)2016 Ktm 250 MOT Analysis
The 2016 Ktm 250 has an MOT pass rate of 82.1% based on 413 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 2,753 miles on the odometer. With a 17.9% failure rate, the 2016 250 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2016 Ktm 250 is Motorcycle lamps and reflectors, responsible for 1.5% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Motorcycle suspension is the second most common issue at 0.7%. Motorcycle wheels follows at 0.5%.
Top failures specific to 2016 models only. The overall 250 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Lamps And Reflectors | 1.5% | 6 |
| 2 | Motorcycle Suspension | 0.7% | 3 |
| 3 | Motorcycle Wheels | 0.5% | 2 |
| 4 | Identification Of The Vehicle | 0.2% | 1 |
| 5 | Motorcycle Brakes | 0.2% | 1 |
| 6 | Motorcycle Tyres | 0.2% | 1 |
Mileage Statistics
About This Data
The 2016 Ktm 250 has an MOT pass rate of 82.1% based on 413 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 2,753 miles on the odometer. With a 17.9% failure rate, the 2016 250 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2016 Ktm 250, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle lamps and reflectors: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 2,753 miles, many of these vehicles are still in good mechanical condition.
Motorcycle lamps and reflectors — 1.5% of failures
Motorcycle lamps and reflectors issues account for 1.5% of MOT failures on 2016 Ktm 250 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Motorcycle suspension — 0.7% of failures
Motorcycle suspension issues account for 0.7% of MOT failures on 2016 Ktm 250 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Motorcycle wheels — 0.5% of failures
Motorcycle wheels issues account for 0.5% of MOT failures on 2016 Ktm 250 models. Wheel failures include cracked or severely corroded alloy wheels, missing or loose wheel nuts, and wheels that are insecurely attached. These are safety-critical and relatively rare compared to tyre failures. Typical repair costs: £100–400 per wheel. Pre-MOT check: Visually inspect wheels for cracks, especially around the spokes and rim. Check that all wheel nuts are present and tightened. Look for signs of impact damage on alloy wheels.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.