Skip to main content
Pass Your MOT

1983 Lambretta Gp200 MOT Pass Rate

Pass rate for Gp200 models manufactured in 1983, based on 435 real MOT test results.

85.3%
Pass Rate
14.7%
Fail Rate
435
Total Tests
3,232
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Gp200 cars tested in 1983. Want to see how cars built in 1983 hold up over time?

View 1983 Lambretta Gp200 vintage page โ†’ (92.5% current pass rate)

1983 Lambretta Gp200 MOT Analysis

The 1983 Lambretta Gp200 has an MOT pass rate of 85.3% based on 435 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 3,232 miles on the odometer. With a 14.7% failure rate, the 1983 Gp200 is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1983 Lambretta Gp200 is Identification of the vehicle, responsible for 0.2% of failures. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs range from ยฃ10โ€“50. Motorcycle brakes is the second most common issue at 0.2%. Motorcycle lamps and reflectors follows at 0.2%.

Top failures specific to 1983 models only. The overall Gp200 page may show different rankings.

What Fails Most

Identification of the vehicle 0.2%
Motorcycle brakes 0.2%
Motorcycle lamps and reflectors 0.2%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Identification Of The Vehicle0.2%1
2Motorcycle Brakes0.2%1
3Motorcycle Lamps And Reflectors0.2%1

Mileage Statistics

3,232
Mean
1,042
Median
282
25th Percentile
2,642
75th Percentile

About This Data

The 1983 Lambretta Gp200 has an MOT pass rate of 85.3% based on 435 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 3,232 miles on the odometer. With a 14.7% failure rate, the 1983 Gp200 is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1983 Lambretta Gp200, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to identification of the vehicle: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing. With relatively low average mileage of 3,232 miles, many of these vehicles are still in good mechanical condition.

Identification of the vehicle โ€” 0.2% of failures

Identification of the vehicle issues account for 0.2% of MOT failures on 1983 Lambretta Gp200 models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: ยฃ10โ€“50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.

Motorcycle brakes โ€” 0.2% of failures

Motorcycle brakes issues account for 0.2% of MOT failures on 1983 Lambretta Gp200 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Motorcycle lamps and reflectors โ€” 0.2% of failures

Motorcycle lamps and reflectors issues account for 0.2% of MOT failures on 1983 Lambretta Gp200 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue