1982 Land Rover 88" - 4 Cyl MOT Pass Rate
Pass rate for 88" - 4 Cyl models manufactured in 1982, based on 3,335 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 88" - 4 Cyl cars tested in 1982. Want to see how cars built in 1982 hold up over time?
View 1982 Land Rover 88" - 4 Cyl vintage page → (57.7% current pass rate)1982 Land Rover 88" - 4 Cyl MOT Analysis
The 1982 Land Rover 88" - 4 Cyl has an MOT pass rate of 52.0% based on 3,335 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,267 miles on the odometer. With a 48.0% failure rate, the 1982 88" - 4 Cyl is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1982 Land Rover 88" - 4 Cyl is Suspension, responsible for 0.1% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Tyres is the second most common issue at 0.1%. Brakes follows at 0.1%.
Top failures specific to 1982 models only. The overall 88" - 4 Cyl page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 0.1% | 3 |
| 2 | Tyres | 0.1% | 3 |
| 3 | Brakes | 0.1% | 2 |
Failures per 10,000 Miles
avg. 54,267 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.02 | 0.1% | 3 |
| Tyres | 0.02 | 0.1% | 3 |
| Brakes | 0.01 | 0.1% | 2 |
| Lamps & Electrical | 0.01 | 0.0% | 1 |
| Steering | 0.01 | 0.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1982 Land Rover 88" - 4 Cyl has an MOT pass rate of 52.0% based on 3,335 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,267 miles on the odometer. With a 48.0% failure rate, the 1982 88" - 4 Cyl is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1982 Land Rover 88" - 4 Cyl, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 54,267 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 0.1% of failures
Suspension issues account for 0.1% of MOT failures on 1982 Land Rover 88" - 4 Cyl models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Tyres — 0.1% of failures
Tyres issues account for 0.1% of MOT failures on 1982 Land Rover 88" - 4 Cyl models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Brakes — 0.1% of failures
Brakes issues account for 0.1% of MOT failures on 1982 Land Rover 88" - 4 Cyl models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.