Skip to main content
Pass Your MOT

1996 Land Rover Defender MOT Pass Rate

Pass rate for Defender models manufactured in 1996, based on 70,662 real MOT test results.

55.9%
Pass Rate
44.1%
Fail Rate
70,662
Total Tests
134,105
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Defender cars tested in 1996. Want to see how cars built in 1996 hold up over time?

View 1996 Land Rover Defender vintage page → (63.4% current pass rate)

1996 Land Rover Defender MOT Analysis

The 1996 Land Rover Defender has an MOT pass rate of 55.9% based on 70,662 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 134,105 miles on the odometer. With a 44.1% failure rate, the 1996 Defender is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 1996 Land Rover Defender is Suspension, responsible for 4.4% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Lamps, reflectors and electrical equipment is the second most common issue at 3.5%. Brakes follows at 2.9%.

Top failures specific to 1996 models only. The overall Defender page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension4.4%3,100
2Lamps, Reflectors And Electrical Equipment3.5%2,443
3Brakes2.9%2,043
4Body, Chassis, Structure2.8%2,000
5Steering2.0%1,432
6Noise, Emissions And Leaks1.8%1,270
7Visibility1.2%815
8Tyres1.1%787
9Seat Belts And Supplementary Restraint Systems0.9%633
10Identification Of The Vehicle0.3%185
11Non-component Advisories0.2%111
12Other0.1%43

Failures per 10,000 Miles

avg. 134,105 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.33% per 10K miLamps & Electrical0.26% per 10K miBrakes0.22% per 10K miBody & Structure0.21% per 10K miSteering0.15% per 10K miNoise, emissions and leaks0.13% per 10K miVisibility0.09% per 10K miTyres0.08% per 10K miSeat Belts0.07% per 10K miIdentification of the vehicle0.02% per 10K miNon-component advisories0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.334.4%3,100
Lamps & Electrical0.263.5%2,443
Brakes0.222.9%2,043
Body & Structure0.212.8%2,000
Steering0.152.0%1,432
Noise, emissions and leaks0.131.8%1,270
Visibility0.091.2%815
Tyres0.081.1%787
Seat Belts0.070.9%633
Identification of the vehicle0.020.3%185
Non-component advisories0.010.2%111

Mileage Statistics

134,105
Mean
105,000
Median
90,766
25th Percentile
135,253
75th Percentile
3.29% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1996 Land Rover Defender has an MOT pass rate of 55.9% based on 70,662 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 134,105 miles on the odometer. With a 44.1% failure rate, the 1996 Defender is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 1996 Land Rover Defender, budget for potential repairs before each MOT. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 134,105 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension — 4.4% of failures

Suspension issues account for 4.4% of MOT failures on 1996 Land Rover Defender models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Lamps, reflectors and electrical equipment — 3.5% of failures

Lamps, reflectors and electrical equipment issues account for 3.5% of MOT failures on 1996 Land Rover Defender models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes — 2.9% of failures

Brakes issues account for 2.9% of MOT failures on 1996 Land Rover Defender models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue