1960 Land Rover Pick Up MOT Pass Rate
Pass rate for Pick Up models manufactured in 1960, based on 41 real MOT test results.
Data from official DVSA MOT testing records
1960 Land Rover Pick Up MOT Analysis
The 1960 Land Rover Pick Up has an MOT pass rate of 70.7% based on 41 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,327 miles on the odometer. With a 29.3% failure rate, the 1960 Pick Up is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 1960 Land Rover Pick Up is Suspension, responsible for 7.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Body, chassis, structure is the second most common issue at 4.9%. Lamps, reflectors and electrical equipment follows at 4.9%.
Top failures specific to 1960 models only. The overall Pick Up page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 7.3% | 3 |
| 2 | Body, Chassis, Structure | 4.9% | 2 |
| 3 | Lamps, Reflectors And Electrical Equipment | 4.9% | 2 |
| 4 | Brakes | 2.4% | 1 |
| 5 | Steering | 2.4% | 1 |
Failures per 10,000 Miles
avg. 52,327 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 1.40 | 7.3% | 3 |
| Body & Structure | 0.93 | 4.9% | 2 |
| Lamps & Electrical | 0.93 | 4.9% | 2 |
| Brakes | 0.47 | 2.4% | 1 |
| Steering | 0.47 | 2.4% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1960 Land Rover Pick Up has an MOT pass rate of 70.7% based on 41 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,327 miles on the odometer. With a 29.3% failure rate, the 1960 Pick Up is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 1960 Land Rover Pick Up, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 52,327 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 7.3% of failures
Suspension issues account for 7.3% of MOT failures on 1960 Land Rover Pick Up models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 4.9% of failures
Body, chassis, structure issues account for 4.9% of MOT failures on 1960 Land Rover Pick Up models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, reflectors and electrical equipment — 4.9% of failures
Lamps, reflectors and electrical equipment issues account for 4.9% of MOT failures on 1960 Land Rover Pick Up models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.