1989 Ldv 200 MOT Pass Rate
Pass rate for 200 models manufactured in 1989, based on 113 real MOT test results.
Data from official DVSA MOT testing records
1989 Ldv 200 MOT Analysis
The 1989 Ldv 200 has an MOT pass rate of 60.2% based on 113 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 80,720 miles on the odometer. With a 39.8% failure rate, the 1989 200 is rated as "Average" for MOT reliability.
The leading cause of MOT failure for the 1989 Ldv 200 is Steering, responsible for 2.7% of failures. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs range from £150–600. Suspension is the second most common issue at 0.9%. Brakes follows at 0.9%.
Top failures specific to 1989 models only. The overall 200 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Steering | 2.7% | 3 |
| 2 | Suspension | 0.9% | 1 |
| 3 | Brakes | 0.9% | 1 |
| 4 | Noise, Emissions And Leaks | 0.9% | 1 |
Failures per 10,000 Miles
avg. 80,720 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Steering | 0.33 | 2.7% | 3 |
| Suspension | 0.11 | 0.9% | 1 |
| Brakes | 0.11 | 0.9% | 1 |
| Noise, emissions and leaks | 0.11 | 0.9% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1989 Ldv 200 has an MOT pass rate of 60.2% based on 113 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 80,720 miles on the odometer. With a 39.8% failure rate, the 1989 200 is rated as "Average" for MOT reliability.
If you own or are considering buying a 1989 Ldv 200, budget for potential repairs before each MOT. Before your MOT, pay particular attention to steering: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels. With an average mileage of 80,720 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Steering — 2.7% of failures
Steering issues account for 2.7% of MOT failures on 1989 Ldv 200 models. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs: £150–600. Pre-MOT check: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels.
Suspension — 0.9% of failures
Suspension issues account for 0.9% of MOT failures on 1989 Ldv 200 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 0.9% of failures
Brakes issues account for 0.9% of MOT failures on 1989 Ldv 200 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.