Skip to main content
Pass Your MOT

2001 Ldv 400 Series D 3.5t MOT Pass Rate

Pass rate for 400 Series D 3.5t models manufactured in 2001, based on 331 real MOT test results.

44.7%
Pass Rate
55.3%
Fail Rate
331
Total Tests
106,626
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 400 Series D 3.5t cars tested in 2001. Want to see how cars built in 2001 hold up over time?

View 2001 Ldv 400 Series D 3.5t vintage page โ†’ (47.2% current pass rate)

2001 Ldv 400 Series D 3.5t MOT Analysis

The 2001 Ldv 400 Series D 3.5t has an MOT pass rate of 44.7% based on 331 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 106,626 miles on the odometer. With a 55.3% failure rate, the 2001 400 Series D 3.5t is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 2001 Ldv 400 Series D 3.5t is Brakes, responsible for 0.6% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Noise, emissions and leaks is the second most common issue at 0.6%. Suspension follows at 0.3%.

Top failures specific to 2001 models only. The overall 400 Series D 3.5t page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes0.6%2
2Noise, Emissions And Leaks0.6%2
3Suspension0.3%1
4Body, Chassis, Structure0.3%1

Failures per 10,000 Miles

avg. 106,626 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.06% per 10K miNoise, emissions and leaks0.06% per 10K miSuspension0.03% per 10K miBody & Structure0.03% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.060.6%2
Noise, emissions and leaks0.060.6%2
Suspension0.030.3%1
Body & Structure0.030.3%1

Mileage Statistics

106,626
Mean
89,763
Median
74,611
25th Percentile
117,209
75th Percentile
5.19% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2001 Ldv 400 Series D 3.5t has an MOT pass rate of 44.7% based on 331 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 106,626 miles on the odometer. With a 55.3% failure rate, the 2001 400 Series D 3.5t is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 2001 Ldv 400 Series D 3.5t, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 106,626 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Brakes โ€” 0.6% of failures

Brakes issues account for 0.6% of MOT failures on 2001 Ldv 400 Series D 3.5t models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Noise, emissions and leaks โ€” 0.6% of failures

Noise, emissions and leaks issues account for 0.6% of MOT failures on 2001 Ldv 400 Series D 3.5t models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: ยฃ100โ€“1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Suspension โ€” 0.3% of failures

Suspension issues account for 0.3% of MOT failures on 2001 Ldv 400 Series D 3.5t models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue