Skip to main content
Pass Your MOT

2015 Lexmoto Matador MOT Pass Rate

Pass rate for Matador models manufactured in 2015, based on 202 real MOT test results.

56.9%
Pass Rate
43.1%
Fail Rate
202
Total Tests
9,477
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Matador cars tested in 2015. Want to see how cars built in 2015 hold up over time?

View 2015 Lexmoto Matador vintage page โ†’ (51.6% current pass rate)

2015 Lexmoto Matador MOT Analysis

The 2015 Lexmoto Matador has an MOT pass rate of 56.9% based on 202 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 9,477 miles on the odometer. With a 43.1% failure rate, the 2015 Matador is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 2015 Lexmoto Matador is Motorcycle brakes, responsible for 2.0% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Motorcycle tyres is the second most common issue at 1.0%. Identification of the vehicle follows at 0.5%.

Top failures specific to 2015 models only. The overall Matador page may show different rankings.

What Fails Most

Motorcycle brakes 2.0%
Motorcycle tyres 1.0%
Identification of the vehicle 0.5%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Motorcycle Brakes2.0%4
2Motorcycle Tyres1.0%2
3Identification Of The Vehicle0.5%1
4Motorcycle Steering0.5%1

Failures per 10,000 Miles

avg. 9,477 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Motorcycle brakes2.09% per 10K miMotorcycle tyres1.04% per 10K miIdentification of the vehicle0.52% per 10K miMotorcycle steering0.52% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Motorcycle brakes2.092.0%4
Motorcycle tyres1.041.0%2
Identification of the vehicle0.520.5%1
Motorcycle steering0.520.5%1

Mileage Statistics

9,477
Mean
6,950
Median
4,834
25th Percentile
10,229
75th Percentile
45.48% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2015 Lexmoto Matador has an MOT pass rate of 56.9% based on 202 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 9,477 miles on the odometer. With a 43.1% failure rate, the 2015 Matador is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 2015 Lexmoto Matador, budget for potential repairs before each MOT. Before your MOT, pay particular attention to motorcycle brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With relatively low average mileage of 9,477 miles, many of these vehicles are still in good mechanical condition.

Motorcycle brakes โ€” 2.0% of failures

Motorcycle brakes issues account for 2.0% of MOT failures on 2015 Lexmoto Matador models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Motorcycle tyres โ€” 1.0% of failures

Motorcycle tyres issues account for 1.0% of MOT failures on 2015 Lexmoto Matador models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Identification of the vehicle โ€” 0.5% of failures

Identification of the vehicle issues account for 0.5% of MOT failures on 2015 Lexmoto Matador models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: ยฃ10โ€“50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue