Skip to main content
Pass Your MOT

2019 Lexmoto Nano 50 Lj 50 Qt-n MOT Pass Rate

Pass rate for Nano 50 Lj 50 Qt-n models manufactured in 2019, based on 221 real MOT test results.

73.8%
Pass Rate
26.2%
Fail Rate
221
Total Tests
6,366
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Nano 50 Lj 50 Qt-n cars tested in 2019. Want to see how cars built in 2019 hold up over time?

View 2019 Lexmoto Nano 50 Lj 50 Qt-n vintage page โ†’ (75.9% current pass rate)

2019 Lexmoto Nano 50 Lj 50 Qt-n MOT Analysis

The 2019 Lexmoto Nano 50 Lj 50 Qt-n has an MOT pass rate of 73.8% based on 221 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 6,366 miles on the odometer. With a 26.2% failure rate, the 2019 Nano 50 Lj 50 Qt-n is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2019 Lexmoto Nano 50 Lj 50 Qt-n is Motorcycle suspension, responsible for 6.8% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Motorcycle brakes is the second most common issue at 3.6%. Motorcycle lamps and reflectors follows at 3.2%.

Top failures specific to 2019 models only. The overall Nano 50 Lj 50 Qt-n page may show different rankings.

What Fails Most

Motorcycle suspension 6.8%
Motorcycle brakes 3.6%
Motorcycle lamps and reflectors 3.2%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Motorcycle Suspension6.8%15
2Motorcycle Brakes3.6%8
3Motorcycle Lamps And Reflectors3.2%7
4Identification Of The Vehicle1.8%4
5Motorcycle Steering1.4%3
6Motorcycle Tyres0.9%2
7Motorcycle Structure And Attachments0.9%2
8Motorcycle Audible Warning (Horn)0.5%1

Failures per 10,000 Miles

avg. 6,366 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Motorcycle suspension10.66% per 10K miMotorcycle brakes5.69% per 10K miMotorcycle lamps and reflectors4.98% per 10K miIdentification of the vehicle2.84% per 10K miMotorcycle steering2.13% per 10K miMotorcycle tyres1.42% per 10K miMotorcycle structure and attachments1.42% per 10K miMotorcycle audible warning (Horn)0.71% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Motorcycle suspension10.666.8%15
Motorcycle brakes5.693.6%8
Motorcycle lamps and reflectors4.983.2%7
Identification of the vehicle2.841.8%4
Motorcycle steering2.131.4%3
Motorcycle tyres1.420.9%2
Motorcycle structure and attachments1.420.9%2
Motorcycle audible warning (Horn)0.710.5%1

Mileage Statistics

6,366
Mean
4,356
Median
3,170
25th Percentile
8,916
75th Percentile
41.16% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2019 Lexmoto Nano 50 Lj 50 Qt-n has an MOT pass rate of 73.8% based on 221 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 6,366 miles on the odometer. With a 26.2% failure rate, the 2019 Nano 50 Lj 50 Qt-n is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2019 Lexmoto Nano 50 Lj 50 Qt-n, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 6,366 miles, many of these vehicles are still in good mechanical condition.

Motorcycle suspension โ€” 6.8% of failures

Motorcycle suspension issues account for 6.8% of MOT failures on 2019 Lexmoto Nano 50 Lj 50 Qt-n models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Motorcycle brakes โ€” 3.6% of failures

Motorcycle brakes issues account for 3.6% of MOT failures on 2019 Lexmoto Nano 50 Lj 50 Qt-n models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Motorcycle lamps and reflectors โ€” 3.2% of failures

Motorcycle lamps and reflectors issues account for 3.2% of MOT failures on 2019 Lexmoto Nano 50 Lj 50 Qt-n models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue