2011 Maserati Gran Cabrio MOT Pass Rate
Pass rate for Gran Cabrio models manufactured in 2011, based on 34 real MOT test results.
Data from official DVSA MOT testing records
2011 Maserati Gran Cabrio MOT Analysis
The 2011 Maserati Gran Cabrio has an MOT pass rate of 76.5% based on 34 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 29,429 miles on the odometer. With a 23.5% failure rate, the 2011 Gran Cabrio is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2011 Maserati Gran Cabrio is Tyres, responsible for 11.8% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Suspension is the second most common issue at 8.8%. Brakes follows at 5.9%.
Top failures specific to 2011 models only. The overall Gran Cabrio page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 11.8% | 4 |
| 2 | Suspension | 8.8% | 3 |
| 3 | Brakes | 5.9% | 2 |
Failures per 10,000 Miles
avg. 29,429 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 4.00 | 11.8% | 4 |
| Suspension | 3.00 | 8.8% | 3 |
| Brakes | 2.00 | 5.9% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2011 Maserati Gran Cabrio has an MOT pass rate of 76.5% based on 34 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 29,429 miles on the odometer. With a 23.5% failure rate, the 2011 Gran Cabrio is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2011 Maserati Gran Cabrio, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 29,429 miles, many of these vehicles are still in good mechanical condition.
Tyres — 11.8% of failures
Tyres issues account for 11.8% of MOT failures on 2011 Maserati Gran Cabrio models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Suspension — 8.8% of failures
Suspension issues account for 8.8% of MOT failures on 2011 Maserati Gran Cabrio models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 5.9% of failures
Brakes issues account for 5.9% of MOT failures on 2011 Maserati Gran Cabrio models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.