1982 Mazda 626 MOT Pass Rate
Pass rate for 626 models manufactured in 1982, based on 32 real MOT test results.
Data from official DVSA MOT testing records
1982 Mazda 626 MOT Analysis
The 1982 Mazda 626 has an MOT pass rate of 56.3% based on 32 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 86,528 miles on the odometer. With a 43.7% failure rate, the 1982 626 is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1982 Mazda 626 is Body, chassis, structure, responsible for 9.4% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Visibility is the second most common issue at 3.1%. Lamps, reflectors and electrical equipment follows at 3.1%.
Top failures specific to 1982 models only. The overall 626 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 9.4% | 3 |
| 2 | Visibility | 3.1% | 1 |
| 3 | Lamps, Reflectors And Electrical Equipment | 3.1% | 1 |
| 4 | Noise, Emissions And Leaks | 3.1% | 1 |
Failures per 10,000 Miles
avg. 86,528 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 1.08 | 9.4% | 3 |
| Visibility | 0.36 | 3.1% | 1 |
| Lamps & Electrical | 0.36 | 3.1% | 1 |
| Noise, emissions and leaks | 0.36 | 3.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1982 Mazda 626 has an MOT pass rate of 56.3% based on 32 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 86,528 miles on the odometer. With a 43.7% failure rate, the 1982 626 is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1982 Mazda 626, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 86,528 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 9.4% of failures
Body, chassis, structure issues account for 9.4% of MOT failures on 1982 Mazda 626 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Visibility — 3.1% of failures
Visibility issues account for 3.1% of MOT failures on 1982 Mazda 626 models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Lamps, reflectors and electrical equipment — 3.1% of failures
Lamps, reflectors and electrical equipment issues account for 3.1% of MOT failures on 1982 Mazda 626 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.