Skip to main content
Pass Your MOT

1988 Mazda B2200 MOT Pass Rate

Pass rate for B2200 models manufactured in 1988, based on 79 real MOT test results.

46.8%
Pass Rate
53.2%
Fail Rate
79
Total Tests
125,887
Avg Mileage

Data from official DVSA MOT testing records

1988 Mazda B2200 MOT Analysis

The 1988 Mazda B2200 has an MOT pass rate of 46.8% based on 79 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,887 miles on the odometer. With a 53.2% failure rate, the 1988 B2200 is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1988 Mazda B2200 is Lamps, Reflectors and Electrical Equipment, responsible for 10.1% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Tyres is the second most common issue at 3.8%. Steering follows at 3.8%.

⚠ Based on limited data (79 tests)

Top failures specific to 1988 models only. The overall B2200 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment10.1%8
2Tyres3.8%3
3Steering3.8%3
4Suspension3.8%3
5Exhaust, Fuel And Emissions2.5%2
6Brakes1.3%1

Failures per 10,000 Miles

avg. 125,887 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.80% per 10K miTyres0.30% per 10K miSteering0.30% per 10K miSuspension0.30% per 10K miEmissions & Exhaust0.20% per 10K miBrakes0.10% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.8010.1%8
Tyres0.303.8%3
Steering0.303.8%3
Suspension0.303.8%3
Emissions & Exhaust0.202.5%2
Brakes0.101.3%1

Mileage Statistics

125,887
Mean
123,440
Median
103,271
25th Percentile
163,263
75th Percentile
4.23% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1988 Mazda B2200 has an MOT pass rate of 46.8% based on 79 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,887 miles on the odometer. With a 53.2% failure rate, the 1988 B2200 is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1988 Mazda B2200, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With an average mileage of 125,887 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Lamps, Reflectors and Electrical Equipment — 10.1% of failures

Lamps, Reflectors and Electrical Equipment issues account for 10.1% of MOT failures on 1988 Mazda B2200 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Tyres — 3.8% of failures

Tyres issues account for 3.8% of MOT failures on 1988 Mazda B2200 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Steering — 3.8% of failures

Steering issues account for 3.8% of MOT failures on 1988 Mazda B2200 models. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs: £150–600. Pre-MOT check: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue