1994 Mazda B2200 MOT Pass Rate
Pass rate for B2200 models manufactured in 1994, based on 257 real MOT test results.
Data from official DVSA MOT testing records
This page shows all B2200 cars tested in 1994. Want to see how cars built in 1994 hold up over time?
View 1994 Mazda B2200 vintage page → (52.5% current pass rate)1994 Mazda B2200 MOT Analysis
The 1994 Mazda B2200 has an MOT pass rate of 55.3% based on 257 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,515 miles on the odometer. With a 44.7% failure rate, the 1994 B2200 is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1994 Mazda B2200 is Brakes, responsible for 1.2% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Body, Structure and General Items is the second most common issue at 0.4%.
Top failures specific to 1994 models only. The overall B2200 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 1.2% | 3 |
| 2 | Body, Structure And General Items | 0.4% | 1 |
Failures per 10,000 Miles
avg. 125,515 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.09 | 1.2% | 3 |
| Body & Structure | 0.03 | 0.4% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1994 Mazda B2200 has an MOT pass rate of 55.3% based on 257 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,515 miles on the odometer. With a 44.7% failure rate, the 1994 B2200 is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1994 Mazda B2200, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 125,515 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Brakes — 1.2% of failures
Brakes issues account for 1.2% of MOT failures on 1994 Mazda B2200 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Body, Structure and General Items — 0.4% of failures
Body, Structure and General Items issues account for 0.4% of MOT failures on 1994 Mazda B2200 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.