Skip to main content
Pass Your MOT

1995 Mazda Bonga MOT Pass Rate

Pass rate for Bonga models manufactured in 1995, based on 32 real MOT test results.

75.0%
Pass Rate
25.0%
Fail Rate
32
Total Tests
81,896
Avg Mileage

Data from official DVSA MOT testing records

1995 Mazda Bonga MOT Analysis

The 1995 Mazda Bonga has an MOT pass rate of 75.0% based on 32 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 81,896 miles on the odometer. With a 25.0% failure rate, the 1995 Bonga is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 1995 Mazda Bonga is Body, chassis, structure, responsible for 18.8% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Tyres is the second most common issue at 12.5%. Suspension follows at 9.4%.

⚠ Based on limited data (32 tests)

Top failures specific to 1995 models only. The overall Bonga page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Body, Chassis, Structure18.8%6
2Tyres12.5%4
3Suspension9.4%3
4Brakes9.4%3
5Lamps, Reflectors And Electrical Equipment6.3%2
6Steering3.1%1
7Visibility3.1%1
8Noise, Emissions And Leaks3.1%1

Failures per 10,000 Miles

avg. 81,896 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Body & Structure2.29% per 10K miTyres1.53% per 10K miSuspension1.14% per 10K miBrakes1.14% per 10K miLamps & Electrical0.76% per 10K miSteering0.38% per 10K miVisibility0.38% per 10K miNoise, emissions and leaks0.38% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Body & Structure2.2918.8%6
Tyres1.5312.5%4
Suspension1.149.4%3
Brakes1.149.4%3
Lamps & Electrical0.766.3%2
Steering0.383.1%1
Visibility0.383.1%1
Noise, emissions and leaks0.383.1%1

Mileage Statistics

81,896
Mean
81,448
Median
74,813
25th Percentile
90,945
75th Percentile
3.05% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1995 Mazda Bonga has an MOT pass rate of 75.0% based on 32 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 81,896 miles on the odometer. With a 25.0% failure rate, the 1995 Bonga is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 1995 Mazda Bonga, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 81,896 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Body, chassis, structure — 18.8% of failures

Body, chassis, structure issues account for 18.8% of MOT failures on 1995 Mazda Bonga models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Tyres — 12.5% of failures

Tyres issues account for 12.5% of MOT failures on 1995 Mazda Bonga models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Suspension — 9.4% of failures

Suspension issues account for 9.4% of MOT failures on 1995 Mazda Bonga models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue