1992 Mazda E Series MOT Pass Rate
Pass rate for E Series models manufactured in 1992, based on 45 real MOT test results.
Data from official DVSA MOT testing records
1992 Mazda E Series MOT Analysis
The 1992 Mazda E Series has an MOT pass rate of 44.4% based on 45 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 127,742 miles on the odometer. With a 55.6% failure rate, the 1992 E Series is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1992 Mazda E Series is Body, chassis, structure, responsible for 26.7% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Lamps, reflectors and electrical equipment is the second most common issue at 17.8%. Suspension follows at 13.3%.
Top failures specific to 1992 models only. The overall E Series page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 26.7% | 12 |
| 2 | Lamps, Reflectors And Electrical Equipment | 17.8% | 8 |
| 3 | Suspension | 13.3% | 6 |
| 4 | Brakes | 8.9% | 4 |
| 5 | Steering | 4.4% | 2 |
| 6 | Identification Of The Vehicle | 4.4% | 2 |
Failures per 10,000 Miles
avg. 127,742 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 2.09 | 26.7% | 12 |
| Lamps & Electrical | 1.39 | 17.8% | 8 |
| Suspension | 1.04 | 13.3% | 6 |
| Brakes | 0.70 | 8.9% | 4 |
| Steering | 0.35 | 4.4% | 2 |
| Identification of the vehicle | 0.35 | 4.4% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 Mazda E Series has an MOT pass rate of 44.4% based on 45 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 127,742 miles on the odometer. With a 55.6% failure rate, the 1992 E Series is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1992 Mazda E Series, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 127,742 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 26.7% of failures
Body, chassis, structure issues account for 26.7% of MOT failures on 1992 Mazda E Series models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, reflectors and electrical equipment — 17.8% of failures
Lamps, reflectors and electrical equipment issues account for 17.8% of MOT failures on 1992 Mazda E Series models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 13.3% of failures
Suspension issues account for 13.3% of MOT failures on 1992 Mazda E Series models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.