Skip to main content
Pass Your MOT

1997 Mazda Freda MOT Pass Rate

Pass rate for Freda models manufactured in 1997, based on 30 real MOT test results.

43.3%
Pass Rate
56.7%
Fail Rate
30
Total Tests
176,101
Avg Mileage

Data from official DVSA MOT testing records

1997 Mazda Freda MOT Analysis

The 1997 Mazda Freda has an MOT pass rate of 43.3% based on 30 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 176,101 miles on the odometer. With a 56.7% failure rate, the 1997 Freda is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1997 Mazda Freda is Suspension, responsible for 13.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Seat belts and supplementary restraint systems is the second most common issue at 6.7%. Lamps, reflectors and electrical equipment follows at 3.3%.

⚠ Based on limited data (30 tests)

Top failures specific to 1997 models only. The overall Freda page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension13.3%4
2Seat Belts And Supplementary Restraint Systems6.7%2
3Lamps, Reflectors And Electrical Equipment3.3%1
4Non-component Advisories3.3%1
5Steering3.3%1

Failures per 10,000 Miles

avg. 176,101 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.76% per 10K miSeat Belts0.38% per 10K miLamps & Electrical0.19% per 10K miNon-component advisories0.19% per 10K miSteering0.19% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.7613.3%4
Seat Belts0.386.7%2
Lamps & Electrical0.193.3%1
Non-component advisories0.193.3%1
Steering0.193.3%1

Mileage Statistics

176,101
Mean
153,919
Median
106,662
25th Percentile
243,518
75th Percentile
3.22% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1997 Mazda Freda has an MOT pass rate of 43.3% based on 30 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 176,101 miles on the odometer. With a 56.7% failure rate, the 1997 Freda is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1997 Mazda Freda, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 176,101 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension — 13.3% of failures

Suspension issues account for 13.3% of MOT failures on 1997 Mazda Freda models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Seat belts and supplementary restraint systems — 6.7% of failures

Seat belts and supplementary restraint systems issues account for 6.7% of MOT failures on 1997 Mazda Freda models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: £50–200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.

Lamps, reflectors and electrical equipment — 3.3% of failures

Lamps, reflectors and electrical equipment issues account for 3.3% of MOT failures on 1997 Mazda Freda models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue