Skip to main content
Pass Your MOT

2003 Mazda Mx-5 1.8i MOT Pass Rate

Pass rate for Mx-5 1.8i models manufactured in 2003, based on 1,636 real MOT test results.

69.7%
Pass Rate
30.3%
Fail Rate
1,636
Total Tests
56,082
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Mx-5 1.8i cars tested in 2003. Want to see how cars built in 2003 hold up over time?

View 2003 Mazda Mx-5 1.8i vintage page โ†’ (57.4% current pass rate)

2003 Mazda Mx-5 1.8i MOT Analysis

The 2003 Mazda Mx-5 1.8i has an MOT pass rate of 69.7% based on 1,636 tests โ€” slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 56,082 miles on the odometer. With a 30.3% failure rate, the 2003 Mx-5 1.8i is rated as "Good" for MOT reliability.

The leading cause of MOT failure for the 2003 Mazda Mx-5 1.8i is Brakes, responsible for 5.6% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Suspension is the second most common issue at 4.6%. Lamps, Reflectors and Electrical Equipment follows at 2.4%.

Top failures specific to 2003 models only. The overall Mx-5 1.8i page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes5.6%92
2Suspension4.6%75
3Lamps, Reflectors And Electrical Equipment2.4%40
4Tyres1.7%27
5Driver's View Of The Road1.5%24
6Body, Structure And General Items1.4%23
7Seat Belts And Supplementary Restraint Systems1.2%19
8Exhaust, Fuel And Emissions0.6%9
9Registration Plates And Vin0.5%8
10Steering0.1%2
11Non-component Advisories0.1%1

Failures per 10,000 Miles

avg. 56,082 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes1.00% per 10K miSuspension0.82% per 10K miLamps & Electrical0.44% per 10K miTyres0.29% per 10K miVisibility0.26% per 10K miBody & Structure0.25% per 10K miSeat Belts0.21% per 10K miEmissions & Exhaust0.10% per 10K miRegistration Plates and VIN0.09% per 10K miSteering0.02% per 10K miNon-component advisories0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes1.005.6%92
Suspension0.824.6%75
Lamps & Electrical0.442.4%40
Tyres0.291.7%27
Visibility0.261.5%24
Body & Structure0.251.4%23
Seat Belts0.211.2%19
Emissions & Exhaust0.100.6%9
Registration Plates and VIN0.090.5%8
Steering0.020.1%2
Non-component advisories0.010.1%1

Mileage Statistics

56,082
Mean
45,557
Median
29,466
25th Percentile
55,013
75th Percentile
5.40% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2003 Mazda Mx-5 1.8i has an MOT pass rate of 69.7% based on 1,636 tests โ€” slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 56,082 miles on the odometer. With a 30.3% failure rate, the 2003 Mx-5 1.8i is rated as "Good" for MOT reliability.

If you own or are considering buying a 2003 Mazda Mx-5 1.8i, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 56,082 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Brakes โ€” 5.6% of failures

Brakes issues account for 5.6% of MOT failures on 2003 Mazda Mx-5 1.8i models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Suspension โ€” 4.6% of failures

Suspension issues account for 4.6% of MOT failures on 2003 Mazda Mx-5 1.8i models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Lamps, Reflectors and Electrical Equipment โ€” 2.4% of failures

Lamps, Reflectors and Electrical Equipment issues account for 2.4% of MOT failures on 2003 Mazda Mx-5 1.8i models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue