1995 Mazda Mx3 MOT Pass Rate
Pass rate for Mx3 models manufactured in 1995, based on 2,180 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Mx3 cars tested in 1995. Want to see how cars built in 1995 hold up over time?
View 1995 Mazda Mx3 vintage page → (50.0% current pass rate)1995 Mazda Mx3 MOT Analysis
The 1995 Mazda Mx3 has an MOT pass rate of 44.8% based on 2,180 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 97,882 miles on the odometer. With a 55.2% failure rate, the 1995 Mx3 is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1995 Mazda Mx3 is Steering, responsible for 0.2% of failures. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs range from £150–600. Body, chassis, structure is the second most common issue at 0.1%. Noise, emissions and leaks follows at 0.1%.
Top failures specific to 1995 models only. The overall Mx3 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Steering | 0.2% | 4 |
| 2 | Body, Chassis, Structure | 0.1% | 3 |
| 3 | Noise, Emissions And Leaks | 0.1% | 3 |
| 4 | Suspension | 0.1% | 3 |
| 5 | Seat Belts And Supplementary Restraint Systems | 0.1% | 2 |
Failures per 10,000 Miles
avg. 97,882 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Steering | 0.02 | 0.2% | 4 |
| Body & Structure | 0.01 | 0.1% | 3 |
| Noise, emissions and leaks | 0.01 | 0.1% | 3 |
| Suspension | 0.01 | 0.1% | 3 |
| Seat Belts | 0.01 | 0.1% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1995 Mazda Mx3 has an MOT pass rate of 44.8% based on 2,180 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 97,882 miles on the odometer. With a 55.2% failure rate, the 1995 Mx3 is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1995 Mazda Mx3, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to steering: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels. With an average mileage of 97,882 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Steering — 0.2% of failures
Steering issues account for 0.2% of MOT failures on 1995 Mazda Mx3 models. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs: £150–600. Pre-MOT check: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels.
Body, chassis, structure — 0.1% of failures
Body, chassis, structure issues account for 0.1% of MOT failures on 1995 Mazda Mx3 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Noise, emissions and leaks — 0.1% of failures
Noise, emissions and leaks issues account for 0.1% of MOT failures on 1995 Mazda Mx3 models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.