Skip to main content
Pass Your MOT

2005 Mercedes-Benz A-Class MOT Pass Rate

Pass rate for A-Class models manufactured in 2005, based on 15,314 real MOT test results.

58.3%
Pass Rate
41.7%
Fail Rate
15,314
Total Tests
86,593
Avg Mileage

Data from official DVSA MOT testing records

This page shows all A-Class cars tested in 2005. Want to see how cars built in 2005 hold up over time?

View 2005 Mercedes-Benz A-Class vintage page → (57.7% current pass rate)

2005 Mercedes-Benz A-Class MOT Analysis

The 2005 Mercedes-Benz A-Class has an MOT pass rate of 58.3% based on 15,314 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 86,593 miles on the odometer. With a 41.7% failure rate, the 2005 A-Class is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 2005 Mercedes-Benz A-Class is Brakes, responsible for 11.1% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Lamps, reflectors and electrical equipment is the second most common issue at 7.0%. Suspension follows at 5.7%.

Top failures specific to 2005 models only. The overall A-Class page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes11.1%1,702
2Lamps, Reflectors And Electrical Equipment7.0%1,075
3Suspension5.7%879
4Tyres5.6%853
5Body, Chassis, Structure3.9%603
6Visibility2.9%438
7Noise, Emissions And Leaks1.6%249
8Non-component Advisories1.1%165
9Steering0.8%124
10Identification Of The Vehicle0.8%120
11Seat Belts And Supplementary Restraint Systems0.7%111
12Road Wheels0.3%43

Failures per 10,000 Miles

avg. 86,593 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes1.28% per 10K miLamps & Electrical0.81% per 10K miSuspension0.66% per 10K miTyres0.64% per 10K miBody & Structure0.45% per 10K miVisibility0.33% per 10K miNoise, emissions and leaks0.19% per 10K miNon-component advisories0.12% per 10K miSteering0.09% per 10K miIdentification of the vehicle0.09% per 10K miSeat Belts0.08% per 10K miWheels0.03% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes1.2811.1%1,702
Lamps & Electrical0.817.0%1,075
Suspension0.665.7%879
Tyres0.645.6%853
Body & Structure0.453.9%603
Visibility0.332.9%438
Noise, emissions and leaks0.191.6%249
Non-component advisories0.121.1%165
Steering0.090.8%124
Identification of the vehicle0.090.8%120
Seat Belts0.080.7%111
Wheels0.030.3%43

Mileage Statistics

86,593
Mean
92,029
Median
74,052
25th Percentile
123,029
75th Percentile
4.82% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2005 Mercedes-Benz A-Class has an MOT pass rate of 58.3% based on 15,314 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 86,593 miles on the odometer. With a 41.7% failure rate, the 2005 A-Class is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 2005 Mercedes-Benz A-Class, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 86,593 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Brakes — 11.1% of failures

Brakes issues account for 11.1% of MOT failures on 2005 Mercedes-Benz A-Class models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment — 7.0% of failures

Lamps, reflectors and electrical equipment issues account for 7.0% of MOT failures on 2005 Mercedes-Benz A-Class models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension — 5.7% of failures

Suspension issues account for 5.7% of MOT failures on 2005 Mercedes-Benz A-Class models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue