Skip to main content
Pass Your MOT

2008 Mercedes-Benz B180 Sport Cdi MOT Pass Rate

Pass rate for B180 Sport Cdi models manufactured in 2008, based on 291 real MOT test results.

71.5%
Pass Rate
28.5%
Fail Rate
291
Total Tests
51,915
Avg Mileage

Data from official DVSA MOT testing records

This page shows all B180 Sport Cdi cars tested in 2008. Want to see how cars built in 2008 hold up over time?

View 2008 Mercedes-Benz B180 Sport Cdi vintage page โ†’ (64.0% current pass rate)

2008 Mercedes-Benz B180 Sport Cdi MOT Analysis

The 2008 Mercedes-Benz B180 Sport Cdi has an MOT pass rate of 71.5% based on 291 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 51,915 miles on the odometer. With a 28.5% failure rate, the 2008 B180 Sport Cdi is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2008 Mercedes-Benz B180 Sport Cdi is Suspension, responsible for 0.7% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Body, chassis, structure is the second most common issue at 0.3%.

Top failures specific to 2008 models only. The overall B180 Sport Cdi page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension0.7%2
2Body, Chassis, Structure0.3%1

Failures per 10,000 Miles

avg. 51,915 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.13% per 10K miBody & Structure0.07% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.130.7%2
Body & Structure0.070.3%1

Mileage Statistics

51,915
Mean
54,356
Median
34,917
25th Percentile
72,530
75th Percentile
5.49% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2008 Mercedes-Benz B180 Sport Cdi has an MOT pass rate of 71.5% based on 291 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 51,915 miles on the odometer. With a 28.5% failure rate, the 2008 B180 Sport Cdi is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2008 Mercedes-Benz B180 Sport Cdi, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 51,915 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Suspension โ€” 0.7% of failures

Suspension issues account for 0.7% of MOT failures on 2008 Mercedes-Benz B180 Sport Cdi models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Body, chassis, structure โ€” 0.3% of failures

Body, chassis, structure issues account for 0.3% of MOT failures on 2008 Mercedes-Benz B180 Sport Cdi models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ€“500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue