1995 Mercedes-Benz C MOT Pass Rate
Pass rate for C models manufactured in 1995, based on 3,489 real MOT test results.
Data from official DVSA MOT testing records
This page shows all C cars tested in 1995. Want to see how cars built in 1995 hold up over time?
View 1995 Mercedes-Benz C vintage page → (75.2% current pass rate)1995 Mercedes-Benz C MOT Analysis
The 1995 Mercedes-Benz C has an MOT pass rate of 68.2% based on 3,489 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 108,980 miles on the odometer. With a 31.8% failure rate, the 1995 C is rated as "Good" for MOT reliability.
The leading cause of MOT failure for the 1995 Mercedes-Benz C is Suspension, responsible for 5.5% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 4.3%. Noise, emissions and leaks follows at 2.5%.
Top failures specific to 1995 models only. The overall C page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 5.5% | 192 |
| 2 | Brakes | 4.3% | 150 |
| 3 | Noise, Emissions And Leaks | 2.5% | 88 |
| 4 | Lamps, Reflectors And Electrical Equipment | 2.4% | 84 |
| 5 | Tyres | 2.3% | 80 |
| 6 | Body, Chassis, Structure | 0.7% | 25 |
| 7 | Visibility | 0.7% | 24 |
| 8 | Steering | 0.6% | 21 |
| 9 | Seat Belts And Supplementary Restraint Systems | 0.5% | 18 |
| 10 | Identification Of The Vehicle | 0.5% | 16 |
| 11 | Non-component Advisories | 0.1% | 5 |
Failures per 10,000 Miles
avg. 108,980 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.50 | 5.5% | 192 |
| Brakes | 0.39 | 4.3% | 150 |
| Noise, emissions and leaks | 0.23 | 2.5% | 88 |
| Lamps & Electrical | 0.22 | 2.4% | 84 |
| Tyres | 0.21 | 2.3% | 80 |
| Body & Structure | 0.07 | 0.7% | 25 |
| Visibility | 0.06 | 0.7% | 24 |
| Steering | 0.06 | 0.6% | 21 |
| Seat Belts | 0.05 | 0.5% | 18 |
| Identification of the vehicle | 0.04 | 0.5% | 16 |
| Non-component advisories | 0.01 | 0.1% | 5 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1995 Mercedes-Benz C has an MOT pass rate of 68.2% based on 3,489 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 108,980 miles on the odometer. With a 31.8% failure rate, the 1995 C is rated as "Good" for MOT reliability.
If you own or are considering buying a 1995 Mercedes-Benz C, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 108,980 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 5.5% of failures
Suspension issues account for 5.5% of MOT failures on 1995 Mercedes-Benz C models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 4.3% of failures
Brakes issues account for 4.3% of MOT failures on 1995 Mercedes-Benz C models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Noise, emissions and leaks — 2.5% of failures
Noise, emissions and leaks issues account for 2.5% of MOT failures on 1995 Mercedes-Benz C models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.