2000 Mercedes-Benz Vito MOT Pass Rate
Pass rate for Vito models manufactured in 2000, based on 1,673 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Vito cars tested in 2000. Want to see how cars built in 2000 hold up over time?
View 2000 Mercedes-Benz Vito vintage page → (60.9% current pass rate)2000 Mercedes-Benz Vito MOT Analysis
The 2000 Mercedes-Benz Vito has an MOT pass rate of 47.2% based on 1,673 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 121,050 miles on the odometer. With a 52.8% failure rate, the 2000 Vito is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 2000 Mercedes-Benz Vito is Suspension, responsible for 6.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 4.8%. Body, chassis, structure follows at 4.1%.
Top failures specific to 2000 models only. The overall Vito page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 6.3% | 106 |
| 2 | Brakes | 4.8% | 81 |
| 3 | Body, Chassis, Structure | 4.1% | 69 |
| 4 | Lamps, Reflectors And Electrical Equipment | 2.6% | 43 |
| 5 | Tyres | 1.8% | 30 |
| 6 | Seat Belts And Supplementary Restraint Systems | 1.3% | 22 |
| 7 | Non-component Advisories | 0.9% | 15 |
| 8 | Visibility | 0.8% | 13 |
| 9 | Steering | 0.6% | 10 |
| 10 | Noise, Emissions And Leaks | 0.5% | 8 |
| 11 | Identification Of The Vehicle | 0.1% | 2 |
Failures per 10,000 Miles
avg. 121,050 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.52 | 6.3% | 106 |
| Brakes | 0.40 | 4.8% | 81 |
| Body & Structure | 0.34 | 4.1% | 69 |
| Lamps & Electrical | 0.21 | 2.6% | 43 |
| Tyres | 0.15 | 1.8% | 30 |
| Seat Belts | 0.11 | 1.3% | 22 |
| Non-component advisories | 0.07 | 0.9% | 15 |
| Visibility | 0.06 | 0.8% | 13 |
| Steering | 0.05 | 0.6% | 10 |
| Noise, emissions and leaks | 0.04 | 0.5% | 8 |
| Identification of the vehicle | 0.01 | 0.1% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2000 Mercedes-Benz Vito has an MOT pass rate of 47.2% based on 1,673 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 121,050 miles on the odometer. With a 52.8% failure rate, the 2000 Vito is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 2000 Mercedes-Benz Vito, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 121,050 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 6.3% of failures
Suspension issues account for 6.3% of MOT failures on 2000 Mercedes-Benz Vito models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 4.8% of failures
Brakes issues account for 4.8% of MOT failures on 2000 Mercedes-Benz Vito models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Body, chassis, structure — 4.1% of failures
Body, chassis, structure issues account for 4.1% of MOT failures on 2000 Mercedes-Benz Vito models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.