Skip to main content
Pass Your MOT

Mercedes 200 T MOT Pass Rate

Overall pass rate across all manufacture years, based on 1,689 real MOT test results. Failure rate: 46.3%.

53.7%
Pass Rate
46.3%
Fail Rate
1,689
Total Tests
Suspension
Top Failure

Data from official DVSA MOT testing records

Mercedes 200 T MOT Reliability Overview

The Mercedes 200 T is a niche vehicle in the UK, with 1,689 MOT test results recorded in our database spanning 10 manufacture years. It has an overall MOT pass rate of 53.7% and a failure rate of 46.3%, which is below the UK average of approximately 37%.

Based on this data, the Mercedes 200 T earns a "Poor" reliability rating. The average Mercedes 200 T presents for MOT with approximately 128,372 miles on the clock. Manufacture year matters: 2007 models achieve the highest pass rate at 84.1%, while 1988 models have the lowest at 46.1%. This 38.0 percentage point difference suggests notable variation in build quality or component durability across production years.

The most common MOT failure for the Mercedes 200 T is Suspension, affecting 39.8% of all tests. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. The second most common issue is Brakes at 33.9%. Lamps, Reflectors and Electrical Equipment rounds out the top three at 31.1%. Together, these top 3 failure categories account for a significant portion of all MOT failures for this model.

Top failures across all manufacture years combined. Individual year pages may show different top failures.

What Fails Most

⚖️ Compare

Best Year to Buy

📊
Insufficient data per manufacture year for this analysis

📈 How Each Vintage Ages

📈
Insufficient data per manufacture year for this analysis

Pass Rate by Manufacture Year

84.1%
Tests Avg Mileage 63,505Top Failure Lamps, Reflectors and Electrical Equipment
1989High Fail Rate
51.5%
Tests Avg Mileage 131,729Top Failure Suspension
1988High Fail Rate
46.1%
Tests Avg Mileage 132,101Top Failure Brakes
1987High Fail Rate
59.1%
Tests Avg Mileage 146,927Top Failure Suspension
1986High Fail Rate
54.8%
Tests Avg Mileage 140,643Top Failure Suspension
1985High Fail Rate
49.4%
Tests Avg Mileage 145,976Top Failure Suspension
1984High Fail Rate
54.8%
Tests Avg Mileage 137,581Top Failure Suspension
1983High Fail Rate
53.0%
Tests Avg Mileage 111,223Top Failure Suspension
1982High Fail Rate
54.8%
Tests Avg Mileage 117,556Top Failure Suspension
1981High Fail Rate
48.6%
Tests Avg Mileage 124,245Top Failure Lamps, Reflectors and Electrical Equipment

* High Fail Rate badge indicates an MOT pass rate below 65% (failure rate above 35%).

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension59.3%1,002
2Brakes53.8%909
3Lamps, Reflectors And Electrical Equipment44.5%751
4Exhaust, Fuel And Emissions28.2%477
5Tyres16.0%271
6Steering14.0%237
7Driver's View Of The Road12.1%204
8Body, Structure And General Items10.4%175
9Seat Belts And Supplementary Restraint Systems8.0%135
10Registration Plates And Vin3.5%59
11Body, Chassis, Structure1.4%24
12Items Not Tested0.9%16
13Noise, Emissions And Leaks0.8%14
14Towbars0.7%12

Failures per 10,000 Miles

avg. 128,372 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension4.62% per 10K miBrakes4.19% per 10K miLamps & Electrical3.46% per 10K miEmissions & Exhaust2.20% per 10K miTyres1.25% per 10K miSteering1.09% per 10K miVisibility0.94% per 10K miBody & Structure0.92% per 10K miSeat Belts0.62% per 10K miRegistration Plates and VIN0.27% per 10K miItems Not Tested0.07% per 10K miNoise, emissions and leaks0.06% per 10K miTowbars0.06% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension4.6259.3%1,002
Brakes4.1953.8%909
Lamps & Electrical3.4644.5%751
Emissions & Exhaust2.2028.2%477
Tyres1.2516.0%271
Steering1.0914.0%237
Visibility0.9412.1%204
Body & Structure0.9211.8%199
Seat Belts0.628.0%135
Registration Plates and VIN0.273.5%59
Items Not Tested0.070.9%16
Noise, emissions and leaks0.060.8%14
Towbars0.060.7%12

🚗 Similar Cars to Consider

🚗
No comparable models

Mileage at MOT

128,372
Mean
128,389
Median
103,174
25th Percentile
172,755
75th Percentile

The average Mercedes 200 T has 128,372 miles when tested for MOT.

📊 Mileage-Adjusted Failure Rate

How often this car fails MOT relative to how much it's driven — a fairer comparison than raw pass rate.

3.61%
Fail Rate per 10K Miles
Average across all makes: 5.38%
46.3%
Overall Fail Rate
128,372 avg miles
✅ Good — below average failure rate

The Mercedes 200 T has a mileage-adjusted failure rate of 3.61% per 10,000 miles driven. The average across all makes is 5.38%, so this model is better than average.

About Mercedes 200 T MOT Data

The Mercedes 200 T is a niche vehicle in the UK, with 1,689 MOT test results recorded in our database spanning 10 manufacture years. It has an overall MOT pass rate of 53.7% and a failure rate of 46.3%, which is below the UK average of approximately 37%.

For Mercedes 200 T owners, these results suggest above-average failure risk — thorough pre-MOT checks are recommended. Focus your pre-MOT checks on suspension and brakes for the best chance of a first-time pass. Use our detailed year-by-year breakdown and failure analysis below to understand how your specific 200 T is likely to perform.

Suspension — 39.8% of failures

Suspension issues account for 39.8% of MOT failures on the Mercedes 200 T. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes — 33.9% of failures

Brakes issues account for 33.9% of MOT failures on the Mercedes 200 T. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, Reflectors and Electrical Equipment — 31.1% of failures

Lamps, Reflectors and Electrical Equipment issues account for 31.1% of MOT failures on the Mercedes 200 T. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Frequently Asked Questions

What is the MOT pass rate for the Mercedes 200 T?

Based on 1,689 MOT tests in our database, the Mercedes 200 T has an overall pass rate of 53.7% (46.3% fail rate).

What are the most common MOT failures on a Mercedes 200 T?

The top 3 reasons a Mercedes 200 T fails its MOT are: 1. Suspension (39.8%), 2. Brakes (33.9%), 3. Lamps, Reflectors and Electrical Equipment (31.1%). Check these areas before booking your MOT.

Is the Mercedes 200 T reliable?

With a 46.3% MOT failure rate, the 200 T is less reliable than average compared to the UK average of ~40%.

What should I check before an MOT on my Mercedes 200 T?

Based on failure data, focus on: Suspension (39.8%); Brakes (33.9%); Lamps, Reflectors and Electrical Equipment (31.1%). These are the areas most likely to cause a fail. Also check all lights, tyres (minimum 1.6mm tread), and windscreen condition — these are quick wins that apply to all cars.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue