1987 Mercedes 200 MOT Pass Rate
Pass rate for 200 models manufactured in 1987, based on 219 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 200 cars tested in 1987. Want to see how cars built in 1987 hold up over time?
View 1987 Mercedes 200 vintage page → (63.6% current pass rate)1987 Mercedes 200 MOT Analysis
The 1987 Mercedes 200 has an MOT pass rate of 55.7% based on 219 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,917 miles on the odometer. With a 44.3% failure rate, the 1987 200 is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1987 Mercedes 200 is Body, chassis, structure, responsible for 0.9% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Suspension is the second most common issue at 0.5%.
Top failures specific to 1987 models only. The overall 200 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.9% | 2 |
| 2 | Suspension | 0.5% | 1 |
Failures per 10,000 Miles
avg. 125,917 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.07 | 0.9% | 2 |
| Suspension | 0.04 | 0.5% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1987 Mercedes 200 has an MOT pass rate of 55.7% based on 219 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,917 miles on the odometer. With a 44.3% failure rate, the 1987 200 is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1987 Mercedes 200, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 125,917 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 0.9% of failures
Body, chassis, structure issues account for 0.9% of MOT failures on 1987 Mercedes 200 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Suspension — 0.5% of failures
Suspension issues account for 0.5% of MOT failures on 1987 Mercedes 200 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.