Skip to main content
Pass Your MOT

2006 Mercedes 208 MOT Pass Rate

Pass rate for 208 models manufactured in 2006, based on 30 real MOT test results.

50.0%
Pass Rate
50.0%
Fail Rate
30
Total Tests
118,600
Avg Mileage

Data from official DVSA MOT testing records

2006 Mercedes 208 MOT Analysis

The 2006 Mercedes 208 has an MOT pass rate of 50.0% based on 30 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 118,600 miles on the odometer. With a 50.0% failure rate, the 2006 208 is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 2006 Mercedes 208 is Suspension, responsible for 36.7% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 33.3%. Lamps, reflectors and electrical equipment follows at 26.7%.

⚠ Based on limited data (30 tests)

Top failures specific to 2006 models only. The overall 208 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension36.7%11
2Brakes33.3%10
3Lamps, Reflectors And Electrical Equipment26.7%8
4Body, Chassis, Structure23.3%7
5Visibility6.7%2
6Steering3.3%1
7Tyres3.3%1

Failures per 10,000 Miles

avg. 118,600 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension3.09% per 10K miBrakes2.81% per 10K miLamps & Electrical2.25% per 10K miBody & Structure1.97% per 10K miVisibility0.56% per 10K miSteering0.28% per 10K miTyres0.28% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension3.0936.7%11
Brakes2.8133.3%10
Lamps & Electrical2.2526.7%8
Body & Structure1.9723.3%7
Visibility0.566.7%2
Steering0.283.3%1
Tyres0.283.3%1

Mileage Statistics

118,600
Mean
142,897
Median
86,497
25th Percentile
156,895
75th Percentile
4.22% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2006 Mercedes 208 has an MOT pass rate of 50.0% based on 30 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 118,600 miles on the odometer. With a 50.0% failure rate, the 2006 208 is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 2006 Mercedes 208, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 118,600 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension — 36.7% of failures

Suspension issues account for 36.7% of MOT failures on 2006 Mercedes 208 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes — 33.3% of failures

Brakes issues account for 33.3% of MOT failures on 2006 Mercedes 208 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment — 26.7% of failures

Lamps, reflectors and electrical equipment issues account for 26.7% of MOT failures on 2006 Mercedes 208 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue