1992 Mercedes 260 E MOT Pass Rate
Pass rate for 260 E models manufactured in 1992, based on 1,047 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 260 E cars tested in 1992. Want to see how cars built in 1992 hold up over time?
View 1992 Mercedes 260 E vintage page → (84.1% current pass rate)1992 Mercedes 260 E MOT Analysis
The 1992 Mercedes 260 E has an MOT pass rate of 65.0% based on 1,047 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,328 miles on the odometer. With a 35.0% failure rate, the 1992 260 E is rated as "Average" for MOT reliability.
The leading cause of MOT failure for the 1992 Mercedes 260 E is Brakes, responsible for 0.8% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Lamps, reflectors and electrical equipment is the second most common issue at 0.2%. Noise, emissions and leaks follows at 0.2%.
Top failures specific to 1992 models only. The overall 260 E page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 0.8% | 8 |
| 2 | Lamps, Reflectors And Electrical Equipment | 0.2% | 2 |
| 3 | Noise, Emissions And Leaks | 0.2% | 2 |
| 4 | Suspension | 0.1% | 1 |
| 5 | Non-component Advisories | 0.1% | 1 |
Failures per 10,000 Miles
avg. 125,328 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.06 | 0.8% | 8 |
| Lamps & Electrical | 0.02 | 0.2% | 2 |
| Noise, emissions and leaks | 0.02 | 0.2% | 2 |
| Suspension | 0.01 | 0.1% | 1 |
| Non-component advisories | 0.01 | 0.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 Mercedes 260 E has an MOT pass rate of 65.0% based on 1,047 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 125,328 miles on the odometer. With a 35.0% failure rate, the 1992 260 E is rated as "Average" for MOT reliability.
If you own or are considering buying a 1992 Mercedes 260 E, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 125,328 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Brakes — 0.8% of failures
Brakes issues account for 0.8% of MOT failures on 1992 Mercedes 260 E models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Lamps, reflectors and electrical equipment — 0.2% of failures
Lamps, reflectors and electrical equipment issues account for 0.2% of MOT failures on 1992 Mercedes 260 E models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Noise, emissions and leaks — 0.2% of failures
Noise, emissions and leaks issues account for 0.2% of MOT failures on 1992 Mercedes 260 E models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.