Skip to main content
Pass Your MOT

1976 Mercedes 280 Ce MOT Pass Rate

Pass rate for 280 Ce models manufactured in 1976, based on 34 real MOT test results.

52.9%
Pass Rate
47.1%
Fail Rate
34
Total Tests
50,979
Avg Mileage

Data from official DVSA MOT testing records

1976 Mercedes 280 Ce MOT Analysis

The 1976 Mercedes 280 Ce has an MOT pass rate of 52.9% based on 34 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 50,979 miles on the odometer. With a 47.1% failure rate, the 1976 280 Ce is rated as "Poor" for MOT reliability.

The leading cause of MOT failure for the 1976 Mercedes 280 Ce is Visibility, responsible for 2.9% of failures. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs range from £10–300. Suspension is the second most common issue at 2.9%. Tyres follows at 2.9%.

⚠ Based on limited data (34 tests)

Top failures specific to 1976 models only. The overall 280 Ce page may show different rankings.

What Fails Most

Visibility 2.9%
Suspension 2.9%
Tyres 2.9%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Visibility2.9%1
2Suspension2.9%1
3Tyres2.9%1

Failures per 10,000 Miles

avg. 50,979 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Visibility0.58% per 10K miSuspension0.58% per 10K miTyres0.58% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Visibility0.582.9%1
Suspension0.582.9%1
Tyres0.582.9%1

Mileage Statistics

50,979
Mean
56,357
Median
39,836
25th Percentile
74,250
75th Percentile
9.24% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1976 Mercedes 280 Ce has an MOT pass rate of 52.9% based on 34 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 50,979 miles on the odometer. With a 47.1% failure rate, the 1976 280 Ce is rated as "Poor" for MOT reliability.

If you own or are considering buying a 1976 Mercedes 280 Ce, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to visibility: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable. At 50,979 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Visibility — 2.9% of failures

Visibility issues account for 2.9% of MOT failures on 1976 Mercedes 280 Ce models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.

Suspension — 2.9% of failures

Suspension issues account for 2.9% of MOT failures on 1976 Mercedes 280 Ce models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Tyres — 2.9% of failures

Tyres issues account for 2.9% of MOT failures on 1976 Mercedes 280 Ce models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue