Skip to main content
Pass Your MOT

1989 Mercedes 500 MOT Pass Rate

Pass rate for 500 models manufactured in 1989, based on 1,243 real MOT test results.

70.5%
Pass Rate
29.5%
Fail Rate
1,243
Total Tests
103,413
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 500 cars tested in 1989. Want to see how cars built in 1989 hold up over time?

View 1989 Mercedes 500 vintage page โ†’ (78.8% current pass rate)

1989 Mercedes 500 MOT Analysis

The 1989 Mercedes 500 has an MOT pass rate of 70.5% based on 1,243 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 103,413 miles on the odometer. With a 29.5% failure rate, the 1989 500 is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 1989 Mercedes 500 is Lamps, reflectors and electrical equipment, responsible for 0.2% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from ยฃ5โ€“50. Suspension is the second most common issue at 0.1%. Visibility follows at 0.1%.

Top failures specific to 1989 models only. The overall 500 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment0.2%3
2Suspension0.1%1
3Visibility0.1%1
4Noise, Emissions And Leaks0.1%1

Failures per 10,000 Miles

avg. 103,413 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.02% per 10K miSuspension0.01% per 10K miVisibility0.01% per 10K miNoise, emissions and leaks0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.020.2%3
Suspension0.010.1%1
Visibility0.010.1%1
Noise, emissions and leaks0.010.1%1

Mileage Statistics

103,413
Mean
96,230
Median
85,015
25th Percentile
153,943
75th Percentile
2.85% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1989 Mercedes 500 has an MOT pass rate of 70.5% based on 1,243 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 103,413 miles on the odometer. With a 29.5% failure rate, the 1989 500 is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 1989 Mercedes 500, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With an average mileage of 103,413 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Lamps, reflectors and electrical equipment โ€” 0.2% of failures

Lamps, reflectors and electrical equipment issues account for 0.2% of MOT failures on 1989 Mercedes 500 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension โ€” 0.1% of failures

Suspension issues account for 0.1% of MOT failures on 1989 Mercedes 500 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Visibility โ€” 0.1% of failures

Visibility issues account for 0.1% of MOT failures on 1989 Mercedes 500 models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: ยฃ10โ€“300. Pre-MOT check: Check the windscreen for chips and cracks โ€” damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue