2010 Mercedes Ml 250 MOT Pass Rate
Pass rate for Ml 250 models manufactured in 2010, based on 482 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Ml 250 cars tested in 2010. Want to see how cars built in 2010 hold up over time?
View 2010 Mercedes Ml 250 vintage page → (65.2% current pass rate)2010 Mercedes Ml 250 MOT Analysis
The 2010 Mercedes Ml 250 has an MOT pass rate of 72.8% based on 482 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 81,226 miles on the odometer. With a 27.2% failure rate, the 2010 Ml 250 is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2010 Mercedes Ml 250 is Body, chassis, structure, responsible for 2.7% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Lamps, reflectors and electrical equipment is the second most common issue at 2.3%. Suspension follows at 2.1%.
Top failures specific to 2010 models only. The overall Ml 250 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 2.7% | 13 |
| 2 | Lamps, Reflectors And Electrical Equipment | 2.3% | 11 |
| 3 | Suspension | 2.1% | 10 |
| 4 | Tyres | 2.1% | 10 |
| 5 | Brakes | 1.9% | 9 |
| 6 | Noise, Emissions And Leaks | 1.2% | 6 |
| 7 | Visibility | 0.4% | 2 |
Failures per 10,000 Miles
avg. 81,226 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.33 | 2.7% | 13 |
| Lamps & Electrical | 0.28 | 2.3% | 11 |
| Suspension | 0.26 | 2.1% | 10 |
| Tyres | 0.26 | 2.1% | 10 |
| Brakes | 0.23 | 1.9% | 9 |
| Noise, emissions and leaks | 0.15 | 1.2% | 6 |
| Visibility | 0.05 | 0.4% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Mercedes Ml 250 has an MOT pass rate of 72.8% based on 482 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 81,226 miles on the odometer. With a 27.2% failure rate, the 2010 Ml 250 is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2010 Mercedes Ml 250, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 81,226 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 2.7% of failures
Body, chassis, structure issues account for 2.7% of MOT failures on 2010 Mercedes Ml 250 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Lamps, reflectors and electrical equipment — 2.3% of failures
Lamps, reflectors and electrical equipment issues account for 2.3% of MOT failures on 2010 Mercedes Ml 250 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 2.1% of failures
Suspension issues account for 2.1% of MOT failures on 2010 Mercedes Ml 250 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.