1996 Mitsubishi 2800 MOT Pass Rate
Pass rate for 2800 models manufactured in 1996, based on 32 real MOT test results.
Data from official DVSA MOT testing records
1996 Mitsubishi 2800 MOT Analysis
The 1996 Mitsubishi 2800 has an MOT pass rate of 50.0% based on 32 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 197,352 miles on the odometer. With a 50.0% failure rate, the 1996 2800 is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1996 Mitsubishi 2800 is Suspension, responsible for 15.6% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 12.5%. Body, chassis, structure follows at 6.3%.
Top failures specific to 1996 models only. The overall 2800 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 15.6% | 5 |
| 2 | Brakes | 12.5% | 4 |
| 3 | Body, Chassis, Structure | 6.3% | 2 |
| 4 | Identification Of The Vehicle | 3.1% | 1 |
| 5 | Seat Belts And Supplementary Restraint Systems | 3.1% | 1 |
| 6 | Tyres | 3.1% | 1 |
Failures per 10,000 Miles
avg. 197,352 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.79 | 15.6% | 5 |
| Brakes | 0.63 | 12.5% | 4 |
| Body & Structure | 0.32 | 6.3% | 2 |
| Identification of the vehicle | 0.16 | 3.1% | 1 |
| Seat Belts | 0.16 | 3.1% | 1 |
| Tyres | 0.16 | 3.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1996 Mitsubishi 2800 has an MOT pass rate of 50.0% based on 32 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 197,352 miles on the odometer. With a 50.0% failure rate, the 1996 2800 is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1996 Mitsubishi 2800, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 197,352 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 15.6% of failures
Suspension issues account for 15.6% of MOT failures on 1996 Mitsubishi 2800 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 12.5% of failures
Brakes issues account for 12.5% of MOT failures on 1996 Mitsubishi 2800 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Body, chassis, structure — 6.3% of failures
Body, chassis, structure issues account for 6.3% of MOT failures on 1996 Mitsubishi 2800 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.