2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 MOT Pass Rate
Pass rate for L200 Barb Lb Dcb Di-d 4x4 models manufactured in 2010, based on 1,747 real MOT test results.
Data from official DVSA MOT testing records
This page shows all L200 Barb Lb Dcb Di-d 4x4 cars tested in 2010. Want to see how cars built in 2010 hold up over time?
View 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 vintage page → (62.2% current pass rate)2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 MOT Analysis
The 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 has an MOT pass rate of 70.9% based on 1,747 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 73,479 miles on the odometer. With a 29.1% failure rate, the 2010 L200 Barb Lb Dcb Di-d 4x4 is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 is Brakes, responsible for 4.9% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Lamps, reflectors and electrical equipment is the second most common issue at 4.8%. Suspension follows at 2.8%.
Top failures specific to 2010 models only. The overall L200 Barb Lb Dcb Di-d 4x4 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 4.9% | 85 |
| 2 | Lamps, Reflectors And Electrical Equipment | 4.8% | 83 |
| 3 | Suspension | 2.8% | 49 |
| 4 | Tyres | 1.5% | 26 |
| 5 | Body, Chassis, Structure | 0.9% | 16 |
| 6 | Non-component Advisories | 0.5% | 9 |
| 7 | Noise, Emissions And Leaks | 0.5% | 8 |
| 8 | Visibility | 0.4% | 7 |
| 9 | Road Wheels | 0.3% | 6 |
| 10 | Seat Belts And Supplementary Restraint Systems | 0.3% | 5 |
| 11 | Identification Of The Vehicle | 0.2% | 4 |
| 12 | Steering | 0.2% | 3 |
Failures per 10,000 Miles
avg. 73,479 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.66 | 4.9% | 85 |
| Lamps & Electrical | 0.65 | 4.8% | 83 |
| Suspension | 0.38 | 2.8% | 49 |
| Tyres | 0.20 | 1.5% | 26 |
| Body & Structure | 0.12 | 0.9% | 16 |
| Non-component advisories | 0.07 | 0.5% | 9 |
| Noise, emissions and leaks | 0.06 | 0.5% | 8 |
| Visibility | 0.05 | 0.4% | 7 |
| Wheels | 0.05 | 0.3% | 6 |
| Seat Belts | 0.04 | 0.3% | 5 |
| Identification of the vehicle | 0.03 | 0.2% | 4 |
| Steering | 0.02 | 0.2% | 3 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 has an MOT pass rate of 70.9% based on 1,747 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 73,479 miles on the odometer. With a 29.1% failure rate, the 2010 L200 Barb Lb Dcb Di-d 4x4 is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 73,479 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes — 4.9% of failures
Brakes issues account for 4.9% of MOT failures on 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Lamps, reflectors and electrical equipment — 4.8% of failures
Lamps, reflectors and electrical equipment issues account for 4.8% of MOT failures on 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 2.8% of failures
Suspension issues account for 2.8% of MOT failures on 2010 Mitsubishi L200 Barb Lb Dcb Di-d 4x4 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.