1992 Mitsubishi Swb MOT Pass Rate
Pass rate for Swb models manufactured in 1992, based on 39 real MOT test results.
Data from official DVSA MOT testing records
1992 Mitsubishi Swb MOT Analysis
The 1992 Mitsubishi Swb has an MOT pass rate of 66.7% based on 39 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 143,108 miles on the odometer. With a 33.3% failure rate, the 1992 Swb is rated as "Good" for MOT reliability.
The leading cause of MOT failure for the 1992 Mitsubishi Swb is Brakes, responsible for 12.8% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Exhaust, Fuel and Emissions is the second most common issue at 5.1%. Suspension follows at 5.1%.
Top failures specific to 1992 models only. The overall Swb page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 12.8% | 5 |
| 2 | Exhaust, Fuel And Emissions | 5.1% | 2 |
| 3 | Suspension | 5.1% | 2 |
| 4 | Lamps, Reflectors And Electrical Equipment | 2.6% | 1 |
| 5 | Seat Belts And Supplementary Restraint Systems | 2.6% | 1 |
Failures per 10,000 Miles
avg. 143,108 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.90 | 12.8% | 5 |
| Emissions & Exhaust | 0.36 | 5.1% | 2 |
| Suspension | 0.36 | 5.1% | 2 |
| Lamps & Electrical | 0.18 | 2.6% | 1 |
| Seat Belts | 0.18 | 2.6% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 Mitsubishi Swb has an MOT pass rate of 66.7% based on 39 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 143,108 miles on the odometer. With a 33.3% failure rate, the 1992 Swb is rated as "Good" for MOT reliability.
If you own or are considering buying a 1992 Mitsubishi Swb, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 143,108 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Brakes — 12.8% of failures
Brakes issues account for 12.8% of MOT failures on 1992 Mitsubishi Swb models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Exhaust, Fuel and Emissions — 5.1% of failures
Exhaust, Fuel and Emissions issues account for 5.1% of MOT failures on 1992 Mitsubishi Swb models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Suspension — 5.1% of failures
Suspension issues account for 5.1% of MOT failures on 1992 Mitsubishi Swb models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.