Skip to main content
Pass Your MOT

2006 Perodua Kelisa MOT Pass Rate

Pass rate for Kelisa models manufactured in 2006, based on 2,629 real MOT test results.

72.1%
Pass Rate
27.9%
Fail Rate
2,629
Total Tests
33,835
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Kelisa cars tested in 2006. Want to see how cars built in 2006 hold up over time?

View 2006 Perodua Kelisa vintage page โ†’ (56.9% current pass rate)

2006 Perodua Kelisa MOT Analysis

The 2006 Perodua Kelisa has an MOT pass rate of 72.1% based on 2,629 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 33,835 miles on the odometer. With a 27.9% failure rate, the 2006 Kelisa is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2006 Perodua Kelisa is Suspension, responsible for 1.2% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Tyres is the second most common issue at 1.1%. Body, chassis, structure follows at 0.6%.

Top failures specific to 2006 models only. The overall Kelisa page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension1.2%31
2Tyres1.1%30
3Body, Chassis, Structure0.6%17
4Lamps, Reflectors And Electrical Equipment0.6%16
5Brakes0.5%14
6Noise, Emissions And Leaks0.4%10
7Visibility0.3%8
8Identification Of The Vehicle0.2%4
9Non-component Advisories0.1%3

Failures per 10,000 Miles

avg. 33,835 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.35% per 10K miTyres0.34% per 10K miBody & Structure0.19% per 10K miLamps & Electrical0.18% per 10K miBrakes0.16% per 10K miNoise, emissions and leaks0.11% per 10K miVisibility0.09% per 10K miIdentification of the vehicle0.04% per 10K miNon-component advisories0.03% per 10K miSteering0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.351.2%31
Tyres0.341.1%30
Body & Structure0.190.6%17
Lamps & Electrical0.180.6%16
Brakes0.160.5%14
Noise, emissions and leaks0.110.4%10
Visibility0.090.3%8
Identification of the vehicle0.040.2%4
Non-component advisories0.030.1%3
Steering0.010.0%1

Mileage Statistics

33,835
Mean
15,130
Median
9,001
25th Percentile
27,293
75th Percentile
8.25% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2006 Perodua Kelisa has an MOT pass rate of 72.1% based on 2,629 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 33,835 miles on the odometer. With a 27.9% failure rate, the 2006 Kelisa is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2006 Perodua Kelisa, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 33,835 miles, many of these vehicles are still in good mechanical condition.

Suspension โ€” 1.2% of failures

Suspension issues account for 1.2% of MOT failures on 2006 Perodua Kelisa models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Tyres โ€” 1.1% of failures

Tyres issues account for 1.1% of MOT failures on 2006 Perodua Kelisa models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Body, chassis, structure โ€” 0.6% of failures

Body, chassis, structure issues account for 0.6% of MOT failures on 2006 Perodua Kelisa models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ€“500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue