2007 Perodua Myvi MOT Pass Rate
Pass rate for Myvi models manufactured in 2007, based on 5,151 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Myvi cars tested in 2007. Want to see how cars built in 2007 hold up over time?
View 2007 Perodua Myvi vintage page → (67.7% current pass rate)2007 Perodua Myvi MOT Analysis
The 2007 Perodua Myvi has an MOT pass rate of 74.9% based on 5,151 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 49,152 miles on the odometer. With a 25.1% failure rate, the 2007 Myvi is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2007 Perodua Myvi is Suspension, responsible for 2.6% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 2.2%. Lamps, reflectors and electrical equipment follows at 1.5%.
Top failures specific to 2007 models only. The overall Myvi page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 2.6% | 136 |
| 2 | Brakes | 2.2% | 111 |
| 3 | Lamps, Reflectors And Electrical Equipment | 1.5% | 76 |
| 4 | Tyres | 1.1% | 57 |
| 5 | Visibility | 0.8% | 40 |
| 6 | Steering | 0.6% | 32 |
| 7 | Body, Chassis, Structure | 0.4% | 23 |
| 8 | Non-component Advisories | 0.4% | 21 |
| 9 | Noise, Emissions And Leaks | 0.4% | 20 |
| 10 | Identification Of The Vehicle | 0.1% | 7 |
Failures per 10,000 Miles
avg. 49,152 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.54 | 2.6% | 136 |
| Brakes | 0.44 | 2.2% | 111 |
| Lamps & Electrical | 0.30 | 1.5% | 76 |
| Tyres | 0.23 | 1.1% | 57 |
| Visibility | 0.16 | 0.8% | 40 |
| Steering | 0.13 | 0.6% | 32 |
| Body & Structure | 0.09 | 0.4% | 23 |
| Non-component advisories | 0.08 | 0.4% | 21 |
| Noise, emissions and leaks | 0.08 | 0.4% | 20 |
| Identification of the vehicle | 0.03 | 0.1% | 7 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2007 Perodua Myvi has an MOT pass rate of 74.9% based on 5,151 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 49,152 miles on the odometer. With a 25.1% failure rate, the 2007 Myvi is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2007 Perodua Myvi, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With relatively low average mileage of 49,152 miles, many of these vehicles are still in good mechanical condition.
Suspension — 2.6% of failures
Suspension issues account for 2.6% of MOT failures on 2007 Perodua Myvi models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 2.2% of failures
Brakes issues account for 2.2% of MOT failures on 2007 Perodua Myvi models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Lamps, reflectors and electrical equipment — 1.5% of failures
Lamps, reflectors and electrical equipment issues account for 1.5% of MOT failures on 2007 Perodua Myvi models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.