2012 Peugeot 208 Access Plus MOT Pass Rate
Pass rate for 208 Access Plus models manufactured in 2012, based on 9,243 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 208 Access Plus cars tested in 2012. Want to see how cars built in 2012 hold up over time?
View 2012 Peugeot 208 Access Plus vintage page → (70.2% current pass rate)2012 Peugeot 208 Access Plus MOT Analysis
The 2012 Peugeot 208 Access Plus has an MOT pass rate of 77.2% based on 9,243 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 37,575 miles on the odometer. With a 22.8% failure rate, the 2012 208 Access Plus is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2012 Peugeot 208 Access Plus is Body, chassis, structure, responsible for 4.0% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Tyres is the second most common issue at 3.6%. Lamps, reflectors and electrical equipment follows at 2.8%.
Top failures specific to 2012 models only. The overall 208 Access Plus page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 4.0% | 373 |
| 2 | Tyres | 3.6% | 333 |
| 3 | Lamps, Reflectors And Electrical Equipment | 2.8% | 258 |
| 4 | Brakes | 2.4% | 219 |
| 5 | Noise, Emissions And Leaks | 1.3% | 117 |
| 6 | Suspension | 1.0% | 93 |
| 7 | Non-component Advisories | 0.6% | 53 |
| 8 | Visibility | 0.5% | 49 |
| 9 | Seat Belts And Supplementary Restraint Systems | 0.1% | 12 |
| 10 | Identification Of The Vehicle | 0.1% | 7 |
Failures per 10,000 Miles
avg. 37,575 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 1.07 | 4.0% | 373 |
| Tyres | 0.96 | 3.6% | 333 |
| Lamps & Electrical | 0.74 | 2.8% | 258 |
| Brakes | 0.63 | 2.4% | 219 |
| Noise, emissions and leaks | 0.34 | 1.3% | 117 |
| Suspension | 0.27 | 1.0% | 93 |
| Non-component advisories | 0.15 | 0.6% | 53 |
| Visibility | 0.14 | 0.5% | 49 |
| Seat Belts | 0.03 | 0.1% | 12 |
| Identification of the vehicle | 0.02 | 0.1% | 7 |
| Steering | 0.01 | 0.0% | 3 |
| Wheels | 0.01 | 0.0% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2012 Peugeot 208 Access Plus has an MOT pass rate of 77.2% based on 9,243 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 37,575 miles on the odometer. With a 22.8% failure rate, the 2012 208 Access Plus is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2012 Peugeot 208 Access Plus, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 37,575 miles, many of these vehicles are still in good mechanical condition.
Body, chassis, structure — 4.0% of failures
Body, chassis, structure issues account for 4.0% of MOT failures on 2012 Peugeot 208 Access Plus models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Tyres — 3.6% of failures
Tyres issues account for 3.6% of MOT failures on 2012 Peugeot 208 Access Plus models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Lamps, reflectors and electrical equipment — 2.8% of failures
Lamps, reflectors and electrical equipment issues account for 2.8% of MOT failures on 2012 Peugeot 208 Access Plus models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.