1996 Peugeot 306 1.9d Slalom MOT Pass Rate
Pass rate for 306 1.9d Slalom models manufactured in 1996, based on 75 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 306 1.9d Slalom cars tested in 1996. Want to see how cars built in 1996 hold up over time?
View 1996 Peugeot 306 1.9d Slalom vintage page → (36.0% current pass rate)1996 Peugeot 306 1.9d Slalom MOT Analysis
The 1996 Peugeot 306 1.9d Slalom has an MOT pass rate of 36.0% based on 75 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 129,886 miles on the odometer. With a 64.0% failure rate, the 1996 306 1.9d Slalom is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1996 Peugeot 306 1.9d Slalom is Brakes, responsible for 120.0% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Lamps, Reflectors and Electrical Equipment is the second most common issue at 113.3%. Suspension follows at 64.0%.
Top failures specific to 1996 models only. The overall 306 1.9d Slalom page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 120.0% | 90 |
| 2 | Lamps, Reflectors And Electrical Equipment | 113.3% | 85 |
| 3 | Suspension | 64.0% | 48 |
| 4 | Tyres | 33.3% | 25 |
| 5 | Steering | 32.0% | 24 |
| 6 | Driver's View Of The Road | 26.7% | 20 |
| 7 | Exhaust, Fuel And Emissions | 21.3% | 16 |
| 8 | Registration Plates And Vin | 5.3% | 4 |
| 9 | Seat Belts And Supplementary Restraint Systems | 4.0% | 3 |
| 10 | Road Wheels | 2.7% | 2 |
Failures per 10,000 Miles
avg. 129,886 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 9.24 | 120.0% | 90 |
| Lamps & Electrical | 8.73 | 113.3% | 85 |
| Suspension | 4.93 | 64.0% | 48 |
| Tyres | 2.57 | 33.3% | 25 |
| Steering | 2.46 | 32.0% | 24 |
| Visibility | 2.05 | 26.7% | 20 |
| Emissions & Exhaust | 1.64 | 21.3% | 16 |
| Registration Plates and VIN | 0.41 | 5.3% | 4 |
| Seat Belts | 0.31 | 4.0% | 3 |
| Wheels | 0.21 | 2.7% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1996 Peugeot 306 1.9d Slalom has an MOT pass rate of 36.0% based on 75 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 129,886 miles on the odometer. With a 64.0% failure rate, the 1996 306 1.9d Slalom is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1996 Peugeot 306 1.9d Slalom, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 129,886 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Brakes — 120.0% of failures
Brakes issues account for 120.0% of MOT failures on 1996 Peugeot 306 1.9d Slalom models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Lamps, Reflectors and Electrical Equipment — 113.3% of failures
Lamps, Reflectors and Electrical Equipment issues account for 113.3% of MOT failures on 1996 Peugeot 306 1.9d Slalom models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Suspension — 64.0% of failures
Suspension issues account for 64.0% of MOT failures on 1996 Peugeot 306 1.9d Slalom models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.