1995 Peugeot 306 Select Xrd MOT Pass Rate
Pass rate for 306 Select Xrd models manufactured in 1995, based on 51 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 306 Select Xrd cars tested in 1995. Want to see how cars built in 1995 hold up over time?
View 1995 Peugeot 306 Select Xrd vintage page → (31.4% current pass rate)1995 Peugeot 306 Select Xrd MOT Analysis
The 1995 Peugeot 306 Select Xrd has an MOT pass rate of 31.4% based on 51 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 137,736 miles on the odometer. With a 68.6% failure rate, the 1995 306 Select Xrd is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1995 Peugeot 306 Select Xrd is Brakes, responsible for 149.0% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Suspension is the second most common issue at 94.1%. Lamps, Reflectors and Electrical Equipment follows at 90.2%.
Top failures specific to 1995 models only. The overall 306 Select Xrd page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 149.0% | 76 |
| 2 | Suspension | 94.1% | 48 |
| 3 | Lamps, Reflectors And Electrical Equipment | 90.2% | 46 |
| 4 | Tyres | 41.2% | 21 |
| 5 | Steering | 35.3% | 18 |
| 6 | Driver's View Of The Road | 23.5% | 12 |
| 7 | Exhaust, Fuel And Emissions | 13.7% | 7 |
| 8 | Body, Structure And General Items | 11.8% | 6 |
| 9 | Road Wheels | 7.8% | 4 |
| 10 | Seat Belts And Supplementary Restraint Systems | 7.8% | 4 |
| 11 | Items Not Tested | 5.9% | 3 |
| 12 | Registration Plates And Vin | 3.9% | 2 |
Failures per 10,000 Miles
avg. 137,736 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 10.82 | 149.0% | 76 |
| Suspension | 6.83 | 94.1% | 48 |
| Lamps & Electrical | 6.55 | 90.2% | 46 |
| Tyres | 2.99 | 41.2% | 21 |
| Steering | 2.56 | 35.3% | 18 |
| Visibility | 1.71 | 23.5% | 12 |
| Emissions & Exhaust | 1.00 | 13.7% | 7 |
| Body & Structure | 0.85 | 11.8% | 6 |
| Wheels | 0.57 | 7.8% | 4 |
| Seat Belts | 0.57 | 7.8% | 4 |
| Items Not Tested | 0.43 | 5.9% | 3 |
| Registration Plates and VIN | 0.28 | 3.9% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1995 Peugeot 306 Select Xrd has an MOT pass rate of 31.4% based on 51 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 137,736 miles on the odometer. With a 68.6% failure rate, the 1995 306 Select Xrd is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1995 Peugeot 306 Select Xrd, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 137,736 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Brakes — 149.0% of failures
Brakes issues account for 149.0% of MOT failures on 1995 Peugeot 306 Select Xrd models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 94.1% of failures
Suspension issues account for 94.1% of MOT failures on 1995 Peugeot 306 Select Xrd models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Lamps, Reflectors and Electrical Equipment — 90.2% of failures
Lamps, Reflectors and Electrical Equipment issues account for 90.2% of MOT failures on 1995 Peugeot 306 Select Xrd models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.