2013 Peugeot Eurobus Sw MOT Pass Rate
Pass rate for Eurobus Sw models manufactured in 2013, based on 30 real MOT test results.
Data from official DVSA MOT testing records
2013 Peugeot Eurobus Sw MOT Analysis
The 2013 Peugeot Eurobus Sw has an MOT pass rate of 80.0% based on 30 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 98,143 miles on the odometer. With a 20.0% failure rate, the 2013 Eurobus Sw is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2013 Peugeot Eurobus Sw is Body, chassis, structure, responsible for 6.7% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Noise, emissions and leaks is the second most common issue at 3.3%. Visibility follows at 3.3%.
Top failures specific to 2013 models only. The overall Eurobus Sw page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 6.7% | 2 |
| 2 | Noise, Emissions And Leaks | 3.3% | 1 |
| 3 | Visibility | 3.3% | 1 |
Failures per 10,000 Miles
avg. 98,143 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.68 | 6.7% | 2 |
| Noise, emissions and leaks | 0.34 | 3.3% | 1 |
| Visibility | 0.34 | 3.3% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2013 Peugeot Eurobus Sw has an MOT pass rate of 80.0% based on 30 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 98,143 miles on the odometer. With a 20.0% failure rate, the 2013 Eurobus Sw is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2013 Peugeot Eurobus Sw, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 98,143 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 6.7% of failures
Body, chassis, structure issues account for 6.7% of MOT failures on 2013 Peugeot Eurobus Sw models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Noise, emissions and leaks — 3.3% of failures
Noise, emissions and leaks issues account for 3.3% of MOT failures on 2013 Peugeot Eurobus Sw models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Visibility — 3.3% of failures
Visibility issues account for 3.3% of MOT failures on 2013 Peugeot Eurobus Sw models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.