Skip to main content
Pass Your MOT

2012 Peugeot Rcz MOT Pass Rate

Pass rate for Rcz models manufactured in 2012, based on 17,690 real MOT test results.

72.0%
Pass Rate
28.0%
Fail Rate
17,690
Total Tests
54,478
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Rcz cars tested in 2012. Want to see how cars built in 2012 hold up over time?

View 2012 Peugeot Rcz vintage page โ†’ (66.6% current pass rate)

2012 Peugeot Rcz MOT Analysis

The 2012 Peugeot Rcz has an MOT pass rate of 72.0% based on 17,690 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,478 miles on the odometer. With a 28.0% failure rate, the 2012 Rcz is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2012 Peugeot Rcz is Tyres, responsible for 3.6% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from ยฃ50โ€“200 per tyre. Lamps, reflectors and electrical equipment is the second most common issue at 3.3%. Suspension follows at 3.2%.

Top failures specific to 2012 models only. The overall Rcz page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Tyres3.6%641
2Lamps, Reflectors And Electrical Equipment3.3%588
3Suspension3.2%565
4Brakes3.0%526
5Noise, Emissions And Leaks1.7%294
6Body, Chassis, Structure0.9%160
7Visibility0.5%96
8Non-component Advisories0.3%59
9Steering0.3%52
10Road Wheels0.3%45
11Seat Belts And Supplementary Restraint Systems0.1%26
12Identification Of The Vehicle0.1%22

Failures per 10,000 Miles

avg. 54,478 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Tyres0.67% per 10K miLamps & Electrical0.61% per 10K miSuspension0.59% per 10K miBrakes0.55% per 10K miNoise, emissions and leaks0.31% per 10K miBody & Structure0.17% per 10K miVisibility0.10% per 10K miNon-component advisories0.06% per 10K miSteering0.05% per 10K miWheels0.05% per 10K miSeat Belts0.03% per 10K miIdentification of the vehicle0.02% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Tyres0.673.6%641
Lamps & Electrical0.613.3%588
Suspension0.593.2%565
Brakes0.553.0%526
Noise, emissions and leaks0.311.7%294
Body & Structure0.170.9%160
Visibility0.100.5%96
Non-component advisories0.060.3%59
Steering0.050.3%52
Wheels0.050.3%45
Seat Belts0.030.1%26
Identification of the vehicle0.020.1%22

Mileage Statistics

54,478
Mean
19,507
Median
14,811
25th Percentile
26,928
75th Percentile
5.14% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2012 Peugeot Rcz has an MOT pass rate of 72.0% based on 17,690 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,478 miles on the odometer. With a 28.0% failure rate, the 2012 Rcz is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2012 Peugeot Rcz, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. At 54,478 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Tyres โ€” 3.6% of failures

Tyres issues account for 3.6% of MOT failures on 2012 Peugeot Rcz models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Lamps, reflectors and electrical equipment โ€” 3.3% of failures

Lamps, reflectors and electrical equipment issues account for 3.3% of MOT failures on 2012 Peugeot Rcz models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension โ€” 3.2% of failures

Suspension issues account for 3.2% of MOT failures on 2012 Peugeot Rcz models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue