Skip to main content
Pass Your MOT

2014 Piaggio Ape MOT Pass Rate

Pass rate for Ape models manufactured in 2014, based on 89 real MOT test results.

73.0%
Pass Rate
27.0%
Fail Rate
89
Total Tests
2,803
Avg Mileage

Data from official DVSA MOT testing records

2014 Piaggio Ape MOT Analysis

The 2014 Piaggio Ape has an MOT pass rate of 73.0% based on 89 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 2,803 miles on the odometer. With a 27.0% failure rate, the 2014 Ape is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2014 Piaggio Ape is Lamps, reflectors and electrical equipment, responsible for 13.5% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Visibility is the second most common issue at 10.1%. Tyres follows at 4.5%.

⚠ Based on limited data (89 tests)

Top failures specific to 2014 models only. The overall Ape page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment13.5%12
2Visibility10.1%9
3Tyres4.5%4
4Brakes1.1%1

Mileage Statistics

2,803
Mean
2,846
Median
1,003
25th Percentile
5,374
75th Percentile

About This Data

The 2014 Piaggio Ape has an MOT pass rate of 73.0% based on 89 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 2,803 miles on the odometer. With a 27.0% failure rate, the 2014 Ape is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2014 Piaggio Ape, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 2,803 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment — 13.5% of failures

Lamps, reflectors and electrical equipment issues account for 13.5% of MOT failures on 2014 Piaggio Ape models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Visibility — 10.1% of failures

Visibility issues account for 10.1% of MOT failures on 2014 Piaggio Ape models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.

Tyres — 4.5% of failures

Tyres issues account for 4.5% of MOT failures on 2014 Piaggio Ape models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue