2010 Piaggio Carnaby MOT Pass Rate
Pass rate for Carnaby models manufactured in 2010, based on 44 real MOT test results.
Data from official DVSA MOT testing records
2010 Piaggio Carnaby MOT Analysis
The 2010 Piaggio Carnaby has an MOT pass rate of 90.9% based on 44 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 15,693 miles on the odometer. With a 9.1% failure rate, the 2010 Carnaby is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2010 Piaggio Carnaby is Motorcycle body and structure, responsible for 2.3% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+.
Top failures specific to 2010 models only. The overall Carnaby page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Body And Structure | 2.3% | 1 |
Failures per 10,000 Miles
avg. 15,693 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle body and structure | 1.45 | 2.3% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Piaggio Carnaby has an MOT pass rate of 90.9% based on 44 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 15,693 miles on the odometer. With a 9.1% failure rate, the 2010 Carnaby is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2010 Piaggio Carnaby, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle body and structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With relatively low average mileage of 15,693 miles, many of these vehicles are still in good mechanical condition.
Motorcycle body and structure — 2.3% of failures
Motorcycle body and structure issues account for 2.3% of MOT failures on 2010 Piaggio Carnaby models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.