1993 Proton 1.5 MOT Pass Rate
Pass rate for 1.5 models manufactured in 1993, based on 1,324 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 1.5 cars tested in 1993. Want to see how cars built in 1993 hold up over time?
View 1993 Proton 1.5 vintage page โ (68.6% current pass rate)1993 Proton 1.5 MOT Analysis
The 1993 Proton 1.5 has an MOT pass rate of 55.7% based on 1,324 tests โ slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 70,693 miles on the odometer. With a 44.3% failure rate, the 1993 1.5 is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1993 Proton 1.5 is Brakes, responsible for 0.2% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ400. Suspension is the second most common issue at 0.2%. Visibility follows at 0.2%.
Top failures specific to 1993 models only. The overall 1.5 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 0.2% | 2 |
| 2 | Suspension | 0.2% | 2 |
| 3 | Visibility | 0.2% | 2 |
| 4 | Body, Chassis, Structure | 0.2% | 2 |
Failures per 10,000 Miles
avg. 70,693 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.02 | 0.2% | 2 |
| Suspension | 0.02 | 0.2% | 2 |
| Visibility | 0.02 | 0.2% | 2 |
| Body & Structure | 0.02 | 0.2% | 2 |
Mileage Statistics
Mileage-adjusted failure rate โ accounts for how much this model year is typically driven.
About This Data
The 1993 Proton 1.5 has an MOT pass rate of 55.7% based on 1,324 tests โ slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 70,693 miles on the odometer. With a 44.3% failure rate, the 1993 1.5 is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1993 Proton 1.5, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 70,693 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Brakes โ 0.2% of failures
Brakes issues account for 0.2% of MOT failures on 1993 Proton 1.5 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension โ 0.2% of failures
Suspension issues account for 0.2% of MOT failures on 1993 Proton 1.5 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Visibility โ 0.2% of failures
Visibility issues account for 0.2% of MOT failures on 1993 Proton 1.5 models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: ยฃ10โ300. Pre-MOT check: Check the windscreen for chips and cracks โ damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005โ2024). Crown copyright, Open Government Licence v3.0.