Skip to main content
Pass Your MOT

2005 Proton Impian MOT Pass Rate

Pass rate for Impian models manufactured in 2005, based on 3,140 real MOT test results.

55.4%
Pass Rate
44.6%
Fail Rate
3,140
Total Tests
56,696
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Impian cars tested in 2005. Want to see how cars built in 2005 hold up over time?

View 2005 Proton Impian vintage page โ†’ (56.7% current pass rate)

2005 Proton Impian MOT Analysis

The 2005 Proton Impian has an MOT pass rate of 55.4% based on 3,140 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 56,696 miles on the odometer. With a 44.6% failure rate, the 2005 Impian is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 2005 Proton Impian is Suspension, responsible for 0.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Brakes is the second most common issue at 0.1%. Lamps, reflectors and electrical equipment follows at 0.1%.

Top failures specific to 2005 models only. The overall Impian page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension0.3%8
2Brakes0.1%4
3Lamps, Reflectors And Electrical Equipment0.1%4
4Visibility0.1%3
5Body, Chassis, Structure0.1%3
6Tyres0.1%2

Failures per 10,000 Miles

avg. 56,696 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.04% per 10K miBrakes0.02% per 10K miLamps & Electrical0.02% per 10K miVisibility0.02% per 10K miBody & Structure0.02% per 10K miTyres0.01% per 10K miNoise, emissions and leaks0.01% per 10K miSteering0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.040.3%8
Brakes0.020.1%4
Lamps & Electrical0.020.1%4
Visibility0.020.1%3
Body & Structure0.020.1%3
Tyres0.010.1%2
Noise, emissions and leaks0.010.0%1
Steering0.010.0%1

Mileage Statistics

56,696
Mean
36,074
Median
21,753
25th Percentile
53,512
75th Percentile
7.87% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2005 Proton Impian has an MOT pass rate of 55.4% based on 3,140 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 56,696 miles on the odometer. With a 44.6% failure rate, the 2005 Impian is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 2005 Proton Impian, budget for potential repairs before each MOT. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 56,696 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Suspension โ€” 0.3% of failures

Suspension issues account for 0.3% of MOT failures on 2005 Proton Impian models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes โ€” 0.1% of failures

Brakes issues account for 0.1% of MOT failures on 2005 Proton Impian models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment โ€” 0.1% of failures

Lamps, reflectors and electrical equipment issues account for 0.1% of MOT failures on 2005 Proton Impian models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue