Qingqi Sinnis MOT Pass Rate
Overall pass rate across all manufacture years, based on 106 real MOT test results. Failure rate: 37.7%.
Data from official DVSA MOT testing records
Qingqi Sinnis MOT Reliability Overview
The Qingqi Sinnis is a rare vehicle in the UK, with 106 MOT test results recorded in our database spanning 0 manufacture years. It has an overall MOT pass rate of 62.3% and a failure rate of 37.7%, which is around the UK average of approximately 37%.
Based on this data, the Qingqi Sinnis earns a "Average" reliability rating. The average Qingqi Sinnis presents for MOT with approximately 11,638 miles on the clock.
The most common MOT failure for the Qingqi Sinnis is Motorcycle steering and suspension, affecting 30.2% of all tests. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. The second most common issue is Motorcycle lighting and signalling at 27.4%. Motorcycle brakes rounds out the top three at 25.5%. Together, these top 3 failure categories account for a significant portion of all MOT failures for this model.
Top failures across all manufacture years combined. Individual year pages may show different top failures.
What Fails Most
* High Fail Rate badge indicates an MOT pass rate below 65% (failure rate above 35%).
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Lighting And Signalling | 34.0% | 36 |
| 2 | Motorcycle Steering And Suspension | 33.0% | 35 |
| 3 | Motorcycle Brakes | 29.2% | 31 |
| 4 | Motorcycle Tyres And Wheels | 26.4% | 28 |
| 5 | Motorcycle Drive System | 16.0% | 17 |
| 6 | Motorcycle Body And Structure | 10.4% | 11 |
| 7 | Motorcycle Lamps And Reflectors | 9.4% | 10 |
| 8 | Motorcycle Fuel And Exhaust | 7.5% | 8 |
| 9 | Motorcycle Structure And Attachments | 6.6% | 7 |
| 10 | Motorcycle Driving Controls | 3.8% | 4 |
| 11 | Motorcycle Suspension | 3.8% | 4 |
| 12 | Motorcycle Reg Plates And Vin | 2.8% | 3 |
| 13 | Identification Of The Vehicle | 0.9% | 1 |
| 14 | Non-component Advisories | 0.9% | 1 |
| 15 | Items Not Tested | 0.9% | 1 |
Failures per 10,000 Miles
avg. 11,638 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle lighting and signalling | 29.18 | 34.0% | 36 |
| Motorcycle steering and suspension | 28.37 | 33.0% | 35 |
| Motorcycle brakes | 25.13 | 29.2% | 31 |
| Motorcycle tyres and wheels | 22.70 | 26.4% | 28 |
| Motorcycle drive system | 13.78 | 16.0% | 17 |
| Motorcycle body and structure | 8.92 | 10.4% | 11 |
| Motorcycle lamps and reflectors | 8.11 | 9.4% | 10 |
| Motorcycle fuel and exhaust | 6.48 | 7.5% | 8 |
| Motorcycle structure and attachments | 5.67 | 6.6% | 7 |
| Motorcycle driving controls | 3.24 | 3.8% | 4 |
| Motorcycle suspension | 3.24 | 3.8% | 4 |
| Motorcycle reg plates and vin | 2.43 | 2.8% | 3 |
| Identification of the vehicle | 0.81 | 0.9% | 1 |
| Non-component advisories | 0.81 | 0.9% | 1 |
| Items Not Tested | 0.81 | 0.9% | 1 |
🚗 Similar Cars to Consider
Mileage at MOT
The average Qingqi Sinnis has 11,638 miles when tested for MOT.
📊 Mileage-Adjusted Failure Rate
How often this car fails MOT relative to how much it's driven — a fairer comparison than raw pass rate.
The Qingqi Sinnis has a mileage-adjusted failure rate of 32.39% per 10,000 miles driven. The average across all makes is 5.38%, so this model is worse than average.
About Qingqi Sinnis MOT Data
The Qingqi Sinnis is a rare vehicle in the UK, with 106 MOT test results recorded in our database spanning 0 manufacture years. It has an overall MOT pass rate of 62.3% and a failure rate of 37.7%, which is around the UK average of approximately 37%.
For Qingqi Sinnis owners, these results suggest average reliability — some preparation before MOT can improve pass chances. Focus your pre-MOT checks on motorcycle steering and suspension and motorcycle lighting and signalling for the best chance of a first-time pass. Use our detailed year-by-year breakdown and failure analysis below to understand how your specific Sinnis is likely to perform.
Motorcycle steering and suspension — 30.2% of failures
Motorcycle steering and suspension issues account for 30.2% of MOT failures on the Qingqi Sinnis. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Motorcycle lighting and signalling — 27.4% of failures
Motorcycle lighting and signalling issues account for 27.4% of MOT failures on the Qingqi Sinnis. Motorcycle lighting and signalling issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.
Motorcycle brakes — 25.5% of failures
Motorcycle brakes issues account for 25.5% of MOT failures on the Qingqi Sinnis. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Frequently Asked Questions
What is the MOT pass rate for the Qingqi Sinnis?
Based on 106 MOT tests in our database, the Qingqi Sinnis has an overall pass rate of 62.3% (37.7% fail rate).
What are the most common MOT failures on a Qingqi Sinnis?
The top 3 reasons a Qingqi Sinnis fails its MOT are: 1. Motorcycle steering and suspension (30.2%), 2. Motorcycle lighting and signalling (27.4%), 3. Motorcycle brakes (25.5%). Check these areas before booking your MOT.
Is the Qingqi Sinnis reliable?
With a 37.7% MOT failure rate, the Sinnis is about average compared to the UK average of ~40%.
What should I check before an MOT on my Qingqi Sinnis?
Based on failure data, focus on: Motorcycle steering and suspension (30.2%); Motorcycle lighting and signalling (27.4%); Motorcycle brakes (25.5%). These are the areas most likely to cause a fail. Also check all lights, tyres (minimum 1.6mm tread), and windscreen condition — these are quick wins that apply to all cars.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.