Skip to main content
Pass Your MOT

1972 Rolls-Royce Silver Shadow MOT Pass Rate

Pass rate for Silver Shadow models manufactured in 1972, based on 295 real MOT test results.

77.3%
Pass Rate
22.7%
Fail Rate
295
Total Tests
58,719
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Silver Shadow cars tested in 1972. Want to see how cars built in 1972 hold up over time?

View 1972 Rolls-Royce Silver Shadow vintage page โ†’ (76.7% current pass rate)

1972 Rolls-Royce Silver Shadow MOT Analysis

The 1972 Rolls-Royce Silver Shadow has an MOT pass rate of 77.3% based on 295 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 58,719 miles on the odometer. With a 22.7% failure rate, the 1972 Silver Shadow is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1972 Rolls-Royce Silver Shadow is Body, chassis, structure, responsible for 0.3% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from ยฃ100โ€“500+. Brakes is the second most common issue at 0.3%.

Top failures specific to 1972 models only. The overall Silver Shadow page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Body, Chassis, Structure0.3%1
2Brakes0.3%1

Failures per 10,000 Miles

avg. 58,719 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Body & Structure0.06% per 10K miBrakes0.06% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Body & Structure0.060.3%1
Brakes0.060.3%1

Mileage Statistics

58,719
Mean
80,937
Median
56,723
25th Percentile
88,735
75th Percentile
3.87% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1972 Rolls-Royce Silver Shadow has an MOT pass rate of 77.3% based on 295 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 58,719 miles on the odometer. With a 22.7% failure rate, the 1972 Silver Shadow is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1972 Rolls-Royce Silver Shadow, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 58,719 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Body, chassis, structure โ€” 0.3% of failures

Body, chassis, structure issues account for 0.3% of MOT failures on 1972 Rolls-Royce Silver Shadow models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ€“500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Brakes โ€” 0.3% of failures

Brakes issues account for 0.3% of MOT failures on 1972 Rolls-Royce Silver Shadow models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue